KC-CP0 series Thin Section Bearings
KC040CP0
KC042CP0
KC045CP0
KC047CP0
KC050CP0
KC055CP0
KC060CP0
| KC040CP0 Thin Section Bearing | ||||
| d | 101.6 mm / 4 in | aperture | ||
| D | 120.65 mm / 4.75 in | outer diameter | ||
| H | 9.525 mm / 0.375 in | radial cross section | ||
| B | 9.525 mm / 0.375 in | width | ||
| d1 | ≈ 108.636 mm / 4.277 in | Inner ring flange diameter | ||
| D1 | ≈ 113.614 mm / 4.473 in | Outer ring flange diameter | ||
| 4.763 mm / 0.1875 in | sphere diameter | |||
| 1.016 mm / 0.04 in | Maximum radius of chamfer on shaft or bearing housing | |||
| KC042CP0 Thin Section Bearing | ||||
| d | 107.95 mm / 4.25 in | aperture | ||
| D | 127 mm / 5 in | outer diameter | ||
| B | 9.525 mm / 0.375 in | radial cross section | ||
| H | 9.525 mm / 0.375 in | width | ||
| d1 | ≈ 114.986 mm / 4.527 in | Inner ring flange diameter | ||
| D1 | ≈ 119.964 mm / 4.723 in | Outer ring flange diameter | ||
| 4.763 mm / 0.1875 in | sphere diameter | |||
| 1.016 mm / 0.04 in | Maximum radius of chamfer on shaft or bearing housing | |||
| KC045CP0 Thin Section Bearing | ||||
| d | 114.3 mm / 4.5 in | aperture | ||
| D | 133.35 mm / 5.25 in | outer diameter | ||
| B | 9.525 mm / 0.375 in | radial cross section | ||
| H | 9.525 mm / 0.375 in | width | ||
| d1 | ≈ 121.336 mm / 4.777 in | Inner ring flange diameter | ||
| D1 | ≈ 126.314 mm / 4.973 in | Outer ring flange diameter | ||
| 4.763 mm / 0.1875 in | sphere diameter | |||
| 1.016 mm / 0.04 in | Maximum radius of chamfer on shaft or bearing housing | |||
| KC047CP0 Thin Section Bearing | ||||
| d | 120.65 mm / 4.75 in | aperture | ||
| D | 139.7 mm / 5.5 in | outer diameter | ||
| B | 9.525 mm / 0.375 in | radial cross section | ||
| H | 9.525 mm / 0.375 in | width | ||
| d1 | ≈ 127.686 mm / 5.027 in | Inner ring flange diameter | ||
| D1 | ≈ 132.664 mm / 5.223 in | Outer ring flange diameter | ||
| 4.763 mm / 0.1875 in | sphere diameter | |||
| 1.016 mm / 0.04 in | Maximum radius of chamfer on shaft or bearing housing | |||
| KC050CP0 Thin Section Bearing | ||||
| d | 127 mm / 5 in | aperture | ||
| D | 146.05 mm / 5.75 in | outer diameter | ||
| B | 9.525 mm / 0.375 in | radial cross section | ||
| H | 9.525 mm / 0.375 in | width | ||
| d1 | ≈ 134.036 mm / 5.277 in | Inner ring flange diameter | ||
| D1 | ≈ 139.014 mm / 5.473 in | Outer ring flange diameter | ||
| 4.763 mm / 0.1875 in | sphere diameter | |||
| 1.016 mm / 0.04 in | Maximum radius of chamfer on shaft or bearing housing | |||
| KC055CP0 Thin Section Bearing | ||||
| d | 139.7 mm / 5.5 in | aperture | ||
| D | 158.75 mm / 6.25 in | outer diameter | ||
| B | 9.525 mm / 0.375 in | radial cross section | ||
| H | 9.525 mm / 0.375 in | width | ||
| d1 | ≈ 146.736 mm / 5.777 in | Inner ring flange diameter | ||
| D1 | ≈ 151.714 mm / 5.973 in | Outer ring flange diameter | ||
| 4.763 mm / 0.1875 in | sphere diameter | |||
| 1.016 mm / 0.04 in | Maximum radius of chamfer on shaft or bearing housing | |||
| KC060CP0 Thin Section Bearing | ||||
| d | 152.4 mm / 6 in | aperture | ||
| D | 171.45 mm / 6.75 in | outer diameter | ||
| B | 9.525 mm / 0.375 in | radial cross section | ||
| H | 9.525 mm / 0.375 in | width | ||
| d1 | ≈ 159.436 mm / 6.277 in | Inner ring flange diameter | ||
| D1 | ≈ 164.414 mm / 6.473 in | Outer ring flange diameter | ||
| 4.763 mm / 0.1875 in | sphere diameter | |||
| 1.016 mm / 0.04 in | Maximum radius of chamfer on shaft or bearing housing | |||
KC065CP0
KC070CP0
KC075CP0
KC080CP0
KC090CP0
KC100CP0
KC110CP0
| KC065CP0 Thin Section Bearing | ||||
| d | 165.1 mm / 6.5 in | aperture | ||
| D | 184.15 mm / 7.25 in | outer diameter | ||
| B | 9.525 mm / 0.375 in | radial cross section | ||
| H | 9.525 mm / 0.375 in | width | ||
| d1 | ≈ 172.136 mm / 6.777 in | Inner ring flange diameter | ||
| D1 | ≈ 177.114 mm / 6.973 in | Outer ring flange diameter | ||
| 4.763 mm / 0.1875 in | sphere diameter | |||
| 1.016 mm / 0.04 in | Maximum radius of chamfer on shaft or bearing housing | |||
| KC070CP0 Thin Section Bearing | ||||
| d | 177.8 mm / 7 in | aperture | ||
| D | 196.85 mm / 7.75 in | outer diameter | ||
| B | 9.525 mm / 0.375 in | radial cross section | ||
| H | 9.525 mm / 0.375 in | width | ||
| d1 | ≈ 184.836 mm / 7.277 in | Inner ring flange diameter | ||
| D1 | ≈ 189.814 mm / 7.473 in | Outer ring flange diameter | ||
| 4.763 mm / 0.1875 in | sphere diameter | |||
| 1.016 mm / 0.04 in | Maximum radius of chamfer on shaft or bearing housing | |||
| KC075CP0 Thin Section Bearing | ||||
| d | 190.5 mm / 7.5 in | aperture | ||
| D | 209.55 mm / 8.25 in | outer diameter | ||
| B | 9.525 mm / 0.375 in | radial cross section | ||
| H | 9.525 mm / 0.375 in | width | ||
| d1 | ≈ 197.536 mm / 7.777 in | Inner ring flange diameter | ||
| D1 | ≈ 202.514 mm / 7.973 in | Outer ring flange diameter | ||
| 4.763 mm / 0.1875 in | sphere diameter | |||
| 1.016 mm / 0.04 in | Maximum radius of chamfer on shaft or bearing housing | |||
| KC080CP0 Thin Section Bearing | ||||
| d | 203.2 mm / 8 in | aperture | ||
| D | 222.25 mm / 8.75 in | outer diameter | ||
| B | 9.525 mm / 0.375 in | radial cross section | ||
| H | 9.525 mm / 0.375 in | width | ||
| d1 | ≈ 210.236 mm / 8.277 in | Inner ring flange diameter | ||
| D1 | ≈ 215.214 mm / 8.473 in | Outer ring flange diameter | ||
| 4.763 mm / 0.1875 in | sphere diameter | |||
| 1.016 mm / 0.04 in | Maximum radius of chamfer on shaft or bearing housing | |||
| KC090CP0 Thin Section Bearing | ||||
| d | 228.6 mm / 9 in | aperture | ||
| D | 247.65 mm / 9.75 in | outer diameter | ||
| B | 9.525 mm / 0.375 in | radial cross section | ||
| H | 9.525 mm / 0.375 in | width | ||
| d1 | ≈ 235.636 mm / 9.277 in | Inner ring flange diameter | ||
| D1 | ≈ 240.614 mm / 9.473 in | Outer ring flange diameter | ||
| 4.763 mm / 0.1875 in | sphere diameter | |||
| 1.016 mm / 0.04 in | Maximum radius of chamfer on shaft or bearing housing | |||
| KC100CP0 Thin Section Bearing | ||||
| d | 254 mm / 10 in | aperture | ||
| D | 273.05 mm / 10.75 in | outer diameter | ||
| B | 9.525 mm / 0.375 in | radial cross section | ||
| H | 9.525 mm /0.375 in | width | ||
| d1 | ≈ 261.036 mm / 10.277 in | Inner ring flange diameter | ||
| D1 | ≈ 266.014 mm / 10.473 in | Outer ring flange diameter | ||
| 4.763 mm / 0.1875 in | sphere diameter | |||
| 1.016 mm / 0.04 in | Maximum radius of chamfer on shaft or bearing housing | |||
| KC110CP0 Thin Section Bearing | ||||
| d | 279.4 mm / 11 in | aperture | ||
| D | 298.45 mm / 11.75 in | outer diameter | ||
| B | 9.525 mm / 0.375 in | radial cross section | ||
| H | 9.525 mm / 0.375 in | width | ||
| d1 | ≈ 286.436 mm / 11.277 in | Inner ring flange diameter | ||
| D1 | ≈ 291.414 mm / 11.473 in | Outer ring flange diameter | ||
| 4.763 mm / 0.1875 in | sphere diameter | |||
| 1.016 mm / 0.04 in | Maximum radius of chamfer on shaft or bearing housing | |||
KC120CP0
KC140CP0
KC160CP0
KC180CP0
KC200CP0
KC250CP0
KC300CP0
| KC120CP0 Thin Section Bearing | ||||
| d | 304.8 mm / 12 in | aperture | ||
| D | 323.85 mm / 12.75 in | outer diameter | ||
| B | 9.525 mm / 0.375 in | radial cross section | ||
| H | 9.525 mm / 0.375 in | width | ||
| d1 | ≈ 311.836 mm / 12.277 in | Inner ring flange diameter | ||
| D1 | ≈ 316.814 mm / 12.473 in | Outer ring flange diameter | ||
| 4.763 mm / 0.1875 in | sphere diameter | |||
| 1.016 mm / 0.04 in | Maximum radius of chamfer on shaft or bearing housing | |||
| KC140CP0 Thin Section Bearing | ||||
| d | 355.6 mm / 14 in | aperture | ||
| D | 374.65 mm / 14.75 in | outer diameter | ||
| B | 9.525 mm / 0.375 in | radial cross section | ||
| H | 9.525 mm / 0.375 in | width | ||
| d1 | ≈ 362.636 mm / 14.277 in | Inner ring flange diameter | ||
| D1 | ≈ 367.614 mm / 14.473 in | Outer ring flange diameter | ||
| 4.763 mm / 0.1875 in | sphere diameter | |||
| 1.016 mm / 0.04 in | Maximum radius of chamfer on shaft or bearing housing | |||
| KC160CP0 Thin Section Bearing | ||||
| d | 406.4 mm / 16 in | aperture | ||
| D | 425.45 mm / 16.75 in | outer diameter | ||
| B | 9.525 mm / 0.375 in | radial cross section | ||
| H | 9.525 mm / 0.375 in | width | ||
| d1 | ≈ 413.436 mm / 16.277 in | Inner ring flange diameter | ||
| D1 | ≈ 418.414 mm / 16.473 in | Outer ring flange diameter | ||
| 4.763 mm / 0.1875 in | sphere diameter | |||
| 1.016 mm / 0.04 in | Maximum radius of chamfer on shaft or bearing housing | |||
| KC180CP0 Thin Section Bearing | ||||
| d | 457.2 mm / 18 in | aperture | ||
| D | 476.25 mm / 18.75 in | outer diameter | ||
| B | 9.525 mm / 0.375 in | radial cross section | ||
| H | 9.525 mm / 0.375 in | width | ||
| d1 | ≈ 464.236 mm / 18.277 in | Inner ring flange diameter | ||
| D1 | ≈ 469.214 mm / 18.473 in | Outer ring flange diameter | ||
| 4.763 mm / 0.1875 in | sphere diameter | |||
| 1.016 mm / 0.04 in | Maximum radius of chamfer on shaft or bearing housing | |||
| KC200CP0 Thin Section Bearing | ||||
| d | 508 mm / 20 in | aperture | ||
| D | 527.05 mm / 20.75 in | outer diameter | ||
| B | 9.525 mm / 0.375 in | radial cross section | ||
| H | 9.525 mm / 0.375 in | width | ||
| d1 | ≈ 515.036 mm / 20.277 in | Inner ring flange diameter | ||
| D1 | ≈ 520.014 mm / 20.473 in | Outer ring flange diameter | ||
| 4.763 mm / 0.1875 in | sphere diameter | |||
| 1.016 mm / 0.04 in | Maximum radius of chamfer on shaft or bearing housing | |||
| KC250CP0 Thin Section Bearing | ||||
| d | 635 mm / 25 in | aperture | ||
| D | 654.05 mm / 25.75 in | outer diameter | ||
| B | 9.525 mm / 0.375 in | radial cross section | ||
| H | 9.525 mm / 0.375 in | width | ||
| d1 | ≈ 642.036 mm / 25.277 in | Inner ring flange diameter | ||
| D1 | ≈ 647.014 mm / 25.473 in | Outer ring flange diameter | ||
| 4.763 mm / 0.1875 in | sphere diameter | |||
| 1.016 mm / 0.04 in | Maximum radius of chamfer on shaft or bearing housing | |||
| KC300CP0 Thin Section Bearing | ||||
| d | 762 mm / 6.5 in | aperture | ||
| D | 781.05 mm / 7.125 in | outer diameter | ||
| B | 9.525 mm / 0.3125 in | radial cross section | ||
| H | 9.525 mm /0.3125 in | width | ||
Our factory's Thin Section Bearings have excellent long-term operational stability and are suitable for continuous equipment operation requirements.Products with P4 and P5 precision grades have undergone durability testing, and their deformation remains within the standard range after long-term bearing of small and medium loads.The internal lubrication system, combined with a sealing structure, reduces grease loss, oxidation, and impurity intrusion, continuously protecting the friction pairs.Under conditions of alternating long-term start-stop and constant-speed operation, vibration and noise will not increase significantly, and rotational accuracy will remain stable.The overall components have a low wear rate and a long service life, and can meet the usage standards of conventional electromechanical equipment for a long time.
High-quality slim section bearings, Alternative to Kaydon, directly from the factory, inquiries welcome!
| | | |
TKW is a High Precision Bearing manufacturer integrating design, R&D, and production. The company specializes in a wide range of products—including high-precision hybrid ceramic ball bearings, ultra-thin-section bearings, servo motor bearings, high-precision stainless steel bearings, vacuum pump bearings, magnetic levitation bearings, thin-walled crossed roller bearings, reactor bearings, all-ceramic bearings, bearings for the food and beverage industry, new energy vehicle bearings, excavator bearings, construction machinery bearings, and custom-engineered bearings—designed to meet the requirements of diverse operating conditions.
Home Products Application About Us News Solutions Download Video Contact Us
Electric Insulated Bearing Spherical Roller Bearings Thrust Roller Bearings Concrete Mixer Truck Bearing Tapered Roller Bearings Plummer Block Housing Track Roller Bearings High Temperature Bearings Linear Guideways Self-Lubricating Bearing Super-Precision Bearings Thin Section Bearings Vibrating Screen Bearing