FAG unsplit plummer block housings VR3
are fitted with rolling bearing like deep groove ball bearing,self-aligning ball bearings,cylindrical roller bearings as well as angular contact ball bearings with a cylindrical bore,the variants of these housings are avaiable completely assembled and greased as bearing units VRE3.from size VR310 , FAG plummer block housings have two ring bolts that must not be loaded to a value greater than the mass of the housing including the bearing and shaft, after mounting, the ring bolts can be replaced by the hexagon head bolts with seals included in the packaging. these unplit FAG plummer block housings developed for fan applications, contain two bearing positions,they are used where a precise and easy-to-fit bearing arrangement is required, for example in:
Materials processing machinery
All variants of FAG unsplit plummer block housings VR3 are available completely assembled and greased as bearing units VRE3,they can be integrated directly in existing machinery without substantial preparation. the shaft diameter range extends from 25mm to 120mm.
Advantage of bearing units VRE3
Easy to fit
Low maintenance requirements
Effective ,low friction sealing against dust and moisture
Bearing arrangement contained in single-piece housing,therefore requiring no time-consuming aligning work.
High tilting moments supported by two bearing with optimum spacing
Six designs allow matching to different load conditions.
In addition to complete bearing units VRE3, the follow are also available. Housings VR3 with covers,grease valves,lubrication nipples,seals,locating elements and if necessary, a spring washer Shaft VRW with locating elements Rolling bearings
Designs of FAG Unsplit plummer block housings VR3
Design A is suitable for predominantly radial load and high speed, it can support axial loads in both directions/
Design B is suitable for high radial load on one side,it can only support axial forces in one direction.
Design C is suitable for high radial load on one side,it can support high axial forces in both directions.
Design D is suitable for axial loads in both directions.
Design E is suitable for high radial loads on both sides and axial loads in both directions.
Design F is suitable for predominantly radial load and high speed,it can support axial load in one direction,
A cast-on boss on the housing body indicates
The position of the cylindrical roller bearing in design B
The position of the non-locating bearing in designs C,D and E
The position of the ondular washer in design F
FAG unsplit plummer block housings is made from flake graphite cast iron,the shaft is made from steel. XRB as the biggest FAG unsplit plummer block housings supplier and China bearing manufacturer
,it can supply the best solution for FAG unsplit plummer block housings and the bearings according to their specific applications.,it can supply Original FAG unsplit plummer block housings,Our large quantity FAG unsplit plummer block housings Stock can meet your need with lowest price and fast delivery.
We accepted DHL,FEDEX,TNT express for small order and samples order,also the transportation By AIR or By Sea,by Train are all avaiable.we are sure we can ship our FAG unsplit plummer block housings to your office at the first time.More technical details,please contact with :
E-mail: email@example.com, Skype:brandbearings