THD Series take-up housings are non-split housings,they consist of a housing body and two covers,the covers are bolted to the body with six or eight bolts,THD housings and SBD housings are supplied with different covers depending on the shaft bearing combition.
THD Housings have a special take-up design to maintain tension on a conveyor belt, this design is narrow and can be used where space is limited,and THD take-up housing bodies are made of spheroidal graphite cast iron,,covers are made of grey cast iron. THD take-up housings are painted blue using a solvent based alkyd and acryl paint.the paint protects the housing,the paint is not affected by most lubricating oils,cutting fluids or alkalescent washing chemicals,THD housing can be repainted with most water or solvent based 1 or 2 component paints.unpainted surfaces are protected by a solventless rust inhibitor.the dimension of THD housings are not standarized either nationally or internationally.THD take-up housings are non-split housings designed to accommodate heavy loads acting in different directions,these types of loads are typically encountered in conveyors,roller beds and crushers,highly reliable bearing arrangement can be designed using THD housing together with CARB toroidal roller bearings, shaft diameter range 50-400mm, plain shaft with bearing on an adapter sleeve,THD take-up are made of cast steel, grey iron,the labyrinth rings are locked on the shaft with adapter rings,the labyrinth rings are locked in different ways depending on the housing type:
- fixed with an adapter ring
- clamped between the bearing and a shaft shoulder
- clamped between the bearing or lock nut and another component on the shaft.
THD take-up housings have ducts to supply grease directly to the seals.using sealed bearings in housings with standard seals is good solution for highly contaminated environments, the sealed bearing together with the Housing seal and grease provide three layers of protection. THD take-up housings can,in most cases,be used together with self-aligning sealed spherical roller bearings,the heavy-duty seals can protects the sealed spherical roller bearings againest contaminants during mounting.THD housing must be mounted properly using the appropriate tools and state of the art mechanical mounting methods.
THD take-up housings for spherical roller bearings on an adapter sleeve
THDD2211 Housing with 22211 EK Bearing + H311 adapter sleeve
THDD2212 Housing with 22212 EK Bearing + H312 adapter sleeve
THDD2213 Housing with 22213 EK Bearing + H313 adapter sleeve
THDD2216 Housing with 22216 EK Bearing + H316 adapter sleeve
THDD2218 Housing with 22218 EK Bearing + H318 adapter sleeve
THDD2220 Housing with 22220 EK Bearing + H320 adapter sleeve
THDD2222 Housing with 22222 EK Bearing + H322 adapter sleeve
THDD3222 Housing with 22322 CCK/W33 Bearing + H2322 adapter sleeve
THDD2224 Housing with 22224 EK Bearing + H3124 adapter sleeve
THDD3224 Housing with 23224 EK Bearing + H2324 adapter sleeve
THDD3226 Housing with 23226 CCK/W33 Bearing + H2326 adapter sleeve
THDD2228 Housing with 22228 CCK/W33 Bearing + H3128 adapter sleeve
THDD3228 Housing with 23228 CCK/W33 Bearing + H2328 adapter sleeve
THDD3030 Housing with 23030 CCK/W33 Bearing + H3030 adapter sleeve
THDD3230 Housing with 23232 CCK/W33 Bearing + H2330 adapter sleeve
THDD3132 Housing with 23132 CCK/W33 Bearing + H3132 adapter sleeve
THDD3232 Housing with 23232 CCK/W33 Bearing + H2332 adapter sleeve
THDD3034 Housing with 23034 CCK/W33 Bearing + H3034 adapter sleeve
THDD3134 Housing with 23134 CCK/W33 Bearing + H3134 adapter sleeve
THDD3136 Housing with 23136 CCK/W33 Bearing + H3136 adapter sleeve
THDD3236 Housing with 23236 CCK/W33 Bearing + H2336 adapter sleeve
THDD3038 Housing with 23038 CCK/W33 Bearing + H3038 adapter sleeve
THDD3138 Housing with 23138 CCK/W33 Bearing + H3138 adapter sleeve
THDD3040 Housing with 23040 CCK/W33 Bearing + H3040 adapter sleeve
THDD3140 Housing with 23140 CCK/W33 Bearing + H3140 adapter sleeve
THDD3240 Housing with 23240 CCK/W33 Bearing + H2340 adapter sleeve
THDD3044 Housing with 23044 CCK/W33 Bearing + H3044 adapter sleeve
THDD3144 Housing with 23144 CCK/W33 Bearing + H3144 adapter sleeve
THDD3244 Housing with 23244 CCK/W33 Bearing + H2344 adapter sleeve
THDD3148 Housing with 23148 CCK/W33 Bearing + H3148 adapter sleeve
THDD3248 Housing with 23248 CCK/W33 Bearing + H2348 adapter sleeve
THDD3052 Housing with 23052 CCK/W33 Bearing + H3052 adapter sleeve
THDD3152 Housing with 23152 CCK/W33 Bearing + H3152 adapter sleeve
THDD3252 Housing with 23252 CCK/W33 Bearing + H2352 adapter sleeve
THDD3256 Housing with 23256 CCK/W33 Bearing + H2356 adapter sleeve
THDD3160 Housing with 23160 CCK/W33 Bearing + H3160 adapter sleeve
THDD3260 Housing with 23260 CCK/W33 Bearing + H3260 adapter sleeve
THDD3264 Housing with 23264 CCK/W33 Bearing + H3264 adapter sleeve
THDD3164 Housing with 23164 CCK/W33 Bearing + H3164 adapter sleeve
THDD3268 Housing with 23268 CAK/W33 Bearing + H3268 adapter sleeve
THDD3168 Housing with 23168 CCK/W33 Bearing + H3168 adapter sleeve
THDD3272 Housing with 23272 CAK/W33 Bearing + H3272 adapter sleeve
THDD3176 Housing with 23176 CAK/W33 Bearing + H3176 adapter sleeve
THDD3276 Housing with 23276 CAK/W33 Bearing + H3276 adapter sleeve
THDD3280 Housing with 23280 CAK/W33 Bearing + H3280 adapter sleeve
THDD3284 Housing with 23284 CAK/W33 Bearing + H3284 adapter sleeve
XRB as the biggest THD Series take-up housings supplier and
China bearing manufacturer, it can supply the best solution for plummer block housing and the bearings according to their specific applications.,it can supply Original THD Series take-up housings ,Our large quantity THD Series take-up housings Stock can meet your need with lowest price and fast delivery.
We accepted DHL,FEDEX,TNT express for small order and samples order,also the transportation By AIR or By Sea,by Train are all avaiable.we are sure we can ship our THD Series take-up housings to your office at the first time. More technical details,please contact with :
E-mail: brandbearings@gmail.com,
Skype:brandbearings
www.xrbearing.com
