Availability: | |
---|---|
GE Series
EASIER / TKW
Spherical Plain Bearing
The spherical plain bearing is a spherical sliding bearing. Its sliding contact surface is an inner spherical surface and an outer spherical surface. It can rotate and swing at any angle during movement. It adopts surface phosphating, frying, inlaying, spraying and other special processes. Method made. Joint bearings have the characteristics of large load capacity, impact resistance, corrosion resistance, wear resistance, self-aligning, good lubrication, etc.
Spherical Plain Bearings Spherical plain bearing 1 Outer ring 2 Sliding contact surfaces 3 Seal 4 Inner ring 5 Lubrication hole 6 Lubrication groove | Rod Ends Rod end 1 Spherical plain bearing 2 Rod end 2a Rod end housing 2b Rod end shank, with an external (male) thread. Shanks are also available with an internal (female) thread or with a welding shank. 3 Grease fitting |
The structure of the spherical plain bearing is simpler than that of the rolling bearing. It is mainly composed of an inner ring with an outer spherical surface and an outer ring with an inner spherical surface. Spherical plain bearing is generally used for swing motion with low speed (i.e. angular motion). Since the sliding surface is spherical, it can also make tilting motion (i.e. centering motion) within a certain angle range. It can still work normally when the supporting shaft and shaft shell hole are not concentric.
Spherical plain bearings are widely used in engineering hydraulic cylinder, forging machine, engineering machinery, automation equipment, automobile shock absorber, water conservancy machinery and other industries. Spherical plain bearings are spherical plain bearings. The basic type is composed of inner and outer rings with spherical sliding spherical contact surfaces. According to its structure and type, it can bear radial load, axial load, or combined load of radial and axial simultaneously.
Type of Spherical Plain Bearing
1. Radial spherical plain bearings
2. Angular contact spherical plain bearings
3. Thrust spherical plain bearings
4. Rod ends with a female thread
Rod ends with a male thread
Rod ends with a welding shank
Application of Spherical Plain Bearings
The spherical plain bearing is a spherical sliding bearing. Its sliding contact surface is an inner spherical surface and an outer spherical surface. It can rotate and swing at any angle during movement. It adopts surface phosphating, frying, inlaying, spraying and other special processes. Method made. Joint bearings have the characteristics of large load capacity, impact resistance, corrosion resistance, wear resistance, self-aligning, good lubrication, etc.
Spherical Plain Bearings Spherical plain bearing 1 Outer ring 2 Sliding contact surfaces 3 Seal 4 Inner ring 5 Lubrication hole 6 Lubrication groove | Rod Ends Rod end 1 Spherical plain bearing 2 Rod end 2a Rod end housing 2b Rod end shank, with an external (male) thread. Shanks are also available with an internal (female) thread or with a welding shank. 3 Grease fitting |
The structure of the spherical plain bearing is simpler than that of the rolling bearing. It is mainly composed of an inner ring with an outer spherical surface and an outer ring with an inner spherical surface. Spherical plain bearing is generally used for swing motion with low speed (i.e. angular motion). Since the sliding surface is spherical, it can also make tilting motion (i.e. centering motion) within a certain angle range. It can still work normally when the supporting shaft and shaft shell hole are not concentric.
Spherical plain bearings are widely used in engineering hydraulic cylinder, forging machine, engineering machinery, automation equipment, automobile shock absorber, water conservancy machinery and other industries. Spherical plain bearings are spherical plain bearings. The basic type is composed of inner and outer rings with spherical sliding spherical contact surfaces. According to its structure and type, it can bear radial load, axial load, or combined load of radial and axial simultaneously.
Type of Spherical Plain Bearing
1. Radial spherical plain bearings
2. Angular contact spherical plain bearings
3. Thrust spherical plain bearings
4. Rod ends with a female thread
Rod ends with a male thread
Rod ends with a welding shank
Application of Spherical Plain Bearings
Radial spherical plain bearings
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GE 4 E | 4 | 12 | 5 | 3 | 16 | 2.04 | 10.2 |
GE 4 C | 4 | 12 | 5 | 3 | 16 | 2.16 | 5.4 |
GE 5 E | 5 | 14 | 6 | 4 | 13 | 3.4 | 17 |
GE 6 E | 6 | 14 | 6 | 4 | 13 | 3.4 | 17 |
GE 6 C | 6 | 14 | 6 | 4 | 13 | 3.6 | 9 |
GE 8 E | 8 | 16 | 8 | 5 | 15 | 5.5 | 27.5 |
GE 8 C | 8 | 16 | 8 | 5 | 15 | 5.85 | 14.6 |
GE 10 E | 10 | 19 | 9 | 6 | 12 | 8.15 | 40.5 |
GE 10 C | 10 | 19 | 9 | 6 | 12 | 8.65 | 21.6 |
GEH 10 C | 10 | 22 | 12 | 7 | 18 | 11.4 | 28.5 |
GE 12 E | 12 | 22 | 10 | 7 | 10 | 10.8 | 54 |
GE 12 C | 12 | 22 | 10 | 7 | 10 | 11.4 | 28.5 |
GE 12 TXGR | 12 | 22 | 10 | 7 | 10 | 30 | 50 |
GEG 12 ESA | 12 | 22 | 12 | 7 | 4 | 10.8 | 54 |
GEH 12 C | 12 | 26 | 15 | 9 | 18 | 18 | 45 |
GEZ 008 ES | 12.7 | 22.225 | 11.1 | 9.525 | 6 | 14 | 41.5 |
GEZM 008 ES | 12.7 | 22.225 | 19.05 | 9.525 | 9 | 14 | 41.5 |
GE 15 ES | 15 | 26 | 12 | 9 | 8 | 17 | 85 |
GE 15 C | 15 | 26 | 12 | 9 | 8 | 18 | 45 |
GE 15 TXGR | 15 | 26 | 12 | 9 | 8 | 47.5 | 80 |
GEH 15 C | 15 | 30 | 16 | 10 | 16 | 22.4 | 56 |
GEZ 010 ES | 15.875 | 26.988 | 13.894 | 11.913 | 6 | 21.5 | 65.5 |
GEZM 010 ES | 15.875 | 26.988 | 23.8 | 11.913 | 9 | 21.6 | 65.5 |
GEG 16 ES | 16 | 28 | 16 | 9 | 4 | 17.6 | 88 |
GE 17 ES | 17 | 30 | 14 | 10 | 10 | 21.2 | 106 |
GE 17 C | 17 | 30 | 14 | 10 | 10 | 22.4 | 56 |
GE 17 TXGR | 17 | 30 | 14 | 10 | 10 | 60 | 100 |
GEH 17 C | 17 | 35 | 20 | 12 | 19 | 31.5 | 78 |
GEZ 012 ES | 19.05 | 31.75 | 16.662 | 14.275 | 6 | 31.5 | 93 |
GEZM 012 ES-2RS | 19.05 | 31.75 | 28.575 | 14.275 | 5 | 31.5 | 93 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GEZM 012 ES | 19.05 | 31.75 | 28.575 | 14.275 | 9 | 31.5 | 93 |
GE 20 ES | 20 | 35 | 16 | 12 | 9 | 30 | 146 |
GE 20 ES-2LS | 20 | 35 | 16 | 12 | 9 | 30 | 146 |
GE 20 ES-2RS | 20 | 35 | 16 | 12 | 9 | 30 | 146 |
GE 20 ESL-2LS | 20 | 35 | 16 | 12 | 9 | 30 | 146 |
GE 20 C | 20 | 35 | 16 | 12 | 9 | 31.5 | 78 |
GE 20 ESX-2LS | 20 | 35 | 16 | 12 | 9 | 44 | 146 |
GE 20 TXE-2LS | 20 | 35 | 16 | 12 | 9 | 83 | 140 |
GE 20 TXG3E-2LS | 20 | 35 | 16 | 12 | 9 | 83 | 140 |
GEG 20 ES | 20 | 35 | 20 | 12 | 4 | 30 | 146 |
GEM 20 ES-2LS | 20 | 35 | 24 | 12 | 6 | 30 | 146 |
GEM 20 ES-2RS | 20 | 35 | 24 | 12 | 6 | 30 | 146 |
GEM 20 ESL-2LS | 20 | 35 | 24 | 12 | 6 | 30 | 146 |
GEM 20 ESX-2LS | 20 | 35 | 24 | 12 | 6 | 44 | 146 |
GEH 20 ES-2LS | 20 | 42 | 25 | 16 | 17 | 48 | 240 |
GEH 20 ES-2RS | 20 | 42 | 25 | 16 | 17 | 48 | 240 |
GEH 20 ESL-2LS | 20 | 42 | 25 | 16 | 17 | 48 | 240 |
GEH 20 C | 20 | 42 | 25 | 16 | 17 | 51 | 127 |
GEH 20 ESX-2LS | 20 | 42 | 25 | 16 | 17 | 72 | 240 |
GEH 20 TXE-2LS | 20 | 42 | 25 | 16 | 17 | 137 | 228 |
GEH 20 TXG3E-2LS | 20 | 42 | 25 | 16 | 17 | 137 | 228 |
GEZ 014 ES | 22.225 | 36.513 | 19.431 | 16.662 | 6 | 42.5 | 127 |
GEZM 014 ES | 22.225 | 36.513 | 33.325 | 16.662 | 9 | 42.5 | 127 |
GE 25 ES | 25 | 42 | 20 | 16 | 7 | 48 | 240 |
GE 25 ES-2LS | 25 | 42 | 20 | 16 | 7 | 48 | 240 |
GE 25 ES-2RS | 25 | 42 | 20 | 16 | 7 | 48 | 240 |
GE 25 ESL-2LS | 25 | 42 | 20 | 16 | 7 | 48 | 240 |
GE 25 C | 25 | 42 | 20 | 16 | 7 | 51 | 127 |
GE 25 ESX-2LS | 25 | 42 | 20 | 16 | 7 | 72 | 240 |
GE 25 TXE-2LS | 25 | 42 | 20 | 16 | 7 | 137 | 228 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GE 25 TXG3E-2LS | 25 | 42 | 20 | 16 | 7 | 137 | 228 |
GEG 25 ES | 25 | 42 | 25 | 16 | 4 | 48 | 240 |
GEM 25 ES-2LS | 25 | 42 | 29 | 16 | 4 | 48 | 240 |
GEM 25 ES-2RS | 25 | 42 | 29 | 16 | 4 | 48 | 240 |
GEM 25 ESL-2LS | 25 | 42 | 29 | 16 | 4 | 48 | 240 |
GEM 25 ESX-2LS | 25 | 42 | 29 | 16 | 4 | 72 | 240 |
GEH 25 ES-2LS | 25 | 47 | 28 | 18 | 17 | 62 | 310 |
GEH 25 ES-2RS | 25 | 47 | 28 | 18 | 17 | 62 | 310 |
GEH 25 ESL-2LS | 25 | 47 | 28 | 18 | 17 | 62 | 310 |
GEH 25 C | 25 | 47 | 28 | 18 | 17 | 65.5 | 166 |
GEH 25 ESX-2LS | 25 | 47 | 28 | 18 | 17 | 93 | 310 |
GEH 25 TXE-2LS | 25 | 47 | 28 | 18 | 17 | 176 | 290 |
GEH 25 TXG3E-2LS | 25 | 47 | 28 | 18 | 17 | 176 | 290 |
GEZ 100 ES | 25.4 | 41.275 | 22.225 | 19.05 | 6 | 56 | 166 |
GEZ 100 ES-2LS | 25.4 | 41.275 | 22.225 | 19.05 | 6 | 56 | 166 |
GEZ 100 ES-2RS | 25.4 | 41.275 | 22.225 | 19.05 | 6 | 56 | 166 |
GEZ 100 ESL-2LS | 25.4 | 41.275 | 22.225 | 19.05 | 6 | 56 | 166 |
GEZ 100 ESX-2LS | 25.4 | 41.275 | 22.225 | 19.05 | 6 | 83 | 166 |
GEZ 100 TXE-2LS | 25.4 | 41.275 | 22.225 | 19.05 | 6 | 83 | 166 |
GEZM 100 ES-2LS | 25.4 | 41.275 | 38.1 | 19.05 | 5 | 56 | 166 |
GEZM 100 ES-2RS | 25.4 | 41.275 | 38.1 | 19.05 | 5 | 56 | 166 |
GEZM 100 ESX-2LS | 25.4 | 41.275 | 38.1 | 19.05 | 5 | 83 | 166 |
GEZM 100 ES | 25.4 | 41.275 | 38.1 | 19.05 | 9 | 56 | 166 |
GE 30 ES | 30 | 47 | 22 | 18 | 6 | 62 | 310 |
GE 30 ES-2LS | 30 | 47 | 22 | 18 | 6 | 62 | 310 |
GE 30 ES-2RS | 30 | 47 | 22 | 18 | 6 | 62 | 310 |
GE 30 ESL-2LS | 30 | 47 | 22 | 18 | 6 | 62 | 310 |
GE 30 C | 30 | 47 | 22 | 18 | 6 | 65.5 | 166 |
GE 30 ESX-2LS | 30 | 47 | 22 | 18 | 6 | 93 | 310 |
GE 30 TXE-2LS | 30 | 47 | 22 | 18 | 6 | 176 | 290 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GE 30 TXG3E-2LS | 30 | 47 | 22 | 18 | 6 | 176 | 290 |
GEM 30 ES-2LS | 30 | 47 | 30 | 18 | 4 | 62 | 310 |
GEM 30 ES-2RS | 30 | 47 | 30 | 18 | 4 | 62 | 310 |
GEM 30 ESL-2LS | 30 | 47 | 30 | 18 | 4 | 62 | 310 |
GEM 30 ESX-2LS | 30 | 47 | 30 | 18 | 4 | 93 | 310 |
GEH 30 ES-2LS | 30 | 55 | 32 | 20 | 17 | 80 | 400 |
GEH 30 ES-2RS | 30 | 55 | 32 | 20 | 17 | 80 | 400 |
GEH 30 ESL-2LS | 30 | 55 | 32 | 20 | 17 | 80 | 400 |
GEH 30 ESX-2LS | 30 | 55 | 32 | 20 | 17 | 120 | 400 |
GEH 30 TXE-2LS | 30 | 55 | 32 | 20 | 17 | 224 | 375 |
GEH 30 TXG3E-2LS | 30 | 55 | 32 | 20 | 17 | 224 | 375 |
GEZ 104 ES | 31.75 | 50.8 | 27.762 | 23.8 | 6 | 86.5 | 260 |
GEZ 104 ES-2LS | 31.75 | 50.8 | 27.762 | 23.8 | 6 | 86.5 | 260 |
GEZ 104 ES-2RS | 31.75 | 50.8 | 27.762 | 23.8 | 6 | 86.5 | 260 |
GEZ 104 ESL-2LS | 31.75 | 50.8 | 27.762 | 23.8 | 6 | 86.5 | 260 |
GEZ 104 ESX-2LS | 31.75 | 50.8 | 27.762 | 23.8 | 6 | 129 | 260 |
GEZ 104 TXE-2LS | 31.75 | 50.8 | 27.762 | 23.8 | 6 | 129 | 260 |
GEZM 104 ES-2LS | 31.75 | 50.8 | 47.625 | 23.8 | 5 | 86.5 | 260 |
GEZM 104 ES-2RS | 31.75 | 50.8 | 47.625 | 23.8 | 5 | 86.5 | 260 |
GEZM 104 ESX-2LS | 31.75 | 50.8 | 47.625 | 23.8 | 5 | 129 | 260 |
GEZM 104 ES | 31.75 | 50.8 | 47.625 | 23.8 | 9 | 86.5 | 260 |
GEZH 104 ES | 31.75 | 61.913 | 35.306 | 28.575 | 8 | 125 | 375 |
GEZH 104 ES-2LS | 31.75 | 61.913 | 35.306 | 28.575 | 8 | 125 | 375 |
GEZH 104 ES-2RS | 31.75 | 61.913 | 35.306 | 28.575 | 8 | 125 | 375 |
GEZH 104 ESX-2LS | 31.75 | 61.913 | 35.306 | 28.575 | 8 | 186 | 375 |
GEG 32 ES | 32 | 52 | 32 | 18 | 4 | 65.5 | 325 |
GEZ 106 ES | 34.925 | 55.563 | 30.15 | 26.187 | 5 | 104 | 310 |
GEZ 106 ES-2LS | 34.925 | 55.563 | 30.15 | 26.187 | 5 | 104 | 310 |
GEZ 106 ES-2RS | 34.925 | 55.563 | 30.15 | 26.187 | 5 | 104 | 310 |
GEZ 106 ESL-2LS | 34.925 | 55.563 | 30.15 | 26.187 | 5 | 104 | 310 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GEZ 106 ESX-2LS | 34.925 | 55.563 | 30.15 | 26.187 | 5 | 156 | 310 |
GEZ 106 TXE-2LS | 34.925 | 55.563 | 30.15 | 26.187 | 5 | 156 | 310 |
GEZM 106 ES-2LS | 34.925 | 55.563 | 52.375 | 26.187 | 5 | 104 | 310 |
GEZM 106 ES-2RS | 34.925 | 55.563 | 52.375 | 26.187 | 5 | 104 | 310 |
GEZM 106 ESX-2LS | 34.925 | 55.563 | 52.375 | 26.187 | 5 | 156 | 310 |
GEZM 106 ES | 34.925 | 55.563 | 52.375 | 26.187 | 9 | 104 | 310 |
GE 35 CJ2 | 35 | 55 | 25 | 20 | 6 | 80 | 200 |
GE 35 ES | 35 | 55 | 25 | 20 | 6 | 80 | 400 |
GE 35 ES-2LS | 35 | 55 | 25 | 20 | 6 | 80 | 400 |
GE 35 ES-2RS | 35 | 55 | 25 | 20 | 6 | 80 | 400 |
GE 35 ESL-2LS | 35 | 55 | 25 | 20 | 6 | 80 | 400 |
GE 35 ESX-2LS | 35 | 55 | 25 | 20 | 6 | 120 | 400 |
GE 35 TXE-2LS | 35 | 55 | 25 | 20 | 6 | 224 | 375 |
GE 35 TXG3E-2LS | 35 | 55 | 25 | 20 | 6 | 224 | 375 |
GEM 35 ES-2LS | 35 | 55 | 35 | 20 | 6 | 80 | 400 |
GEM 35 ES-2RS | 35 | 55 | 35 | 20 | 6 | 80 | 400 |
GEM 35 ESL-2LS | 35 | 55 | 35 | 20 | 6 | 80 | 400 |
GEM 35 ESX-2LS | 35 | 55 | 35 | 20 | 6 | 120 | 400 |
GEH 35 ES-2LS | 35 | 62 | 35 | 22 | 15 | 100 | 500 |
GEH 35 ES-2RS | 35 | 62 | 35 | 22 | 15 | 100 | 500 |
GEH 35 ESL-2LS | 35 | 62 | 35 | 22 | 15 | 100 | 500 |
GEH 35 ESX-2LS | 35 | 62 | 35 | 22 | 15 | 150 | 500 |
GEH 35 TXE-2LS | 35 | 62 | 35 | 22 | 15 | 280 | 465 |
GEH 35 TXG3E-2LS | 35 | 62 | 35 | 22 | 15 | 280 | 465 |
GEZ 108 ES | 38.1 | 61.913 | 33.325 | 28.575 | 6 | 125 | 375 |
GEZ 108 ES-2LS | 38.1 | 61.913 | 33.325 | 28.575 | 6 | 125 | 375 |
GEZ 108 ES-2RS | 38.1 | 61.913 | 33.325 | 28.575 | 6 | 125 | 375 |
GEZ 108 ESL-2LS | 38.1 | 61.913 | 33.325 | 28.575 | 6 | 125 | 375 |
GEZ 108 ESX-2LS | 38.1 | 61.913 | 33.325 | 28.575 | 6 | 186 | 375 |
GEZ 108 TXE-2LS | 38.1 | 61.913 | 33.325 | 28.575 | 6 | 186 | 375 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GEZM 108 ES-2LS | 38.1 | 61.913 | 57.15 | 28.575 | 5 | 125 | 375 |
GEZM 108 ES-2RS | 38.1 | 61.913 | 57.15 | 28.575 | 5 | 125 | 375 |
GEZM 108 ESX-2LS | 38.1 | 61.913 | 57.15 | 28.575 | 5 | 186 | 375 |
GEZM 108 ES | 38.1 | 61.913 | 57.15 | 28.575 | 9 | 125 | 375 |
GEZH 108 ES | 38.1 | 71.438 | 40.132 | 33.325 | 7 | 170 | 510 |
GEZH 108 ES-2LS | 38.1 | 71.438 | 40.132 | 33.325 | 7 | 170 | 510 |
GEZH 108 ES-2RS | 38.1 | 71.438 | 40.132 | 33.325 | 7 | 170 | 510 |
GEZH 108 ESX-2LS | 38.1 | 71.438 | 40.132 | 33.325 | 7 | 255 | 510 |
GE 40 ES-2LS | 40 | 62 | 28 | 22 | 6 | 100 | 500 |
GE 40 ES-2RS | 40 | 62 | 28 | 22 | 6 | 100 | 500 |
GE 40 ESL-2LS | 40 | 62 | 28 | 22 | 6 | 100 | 500 |
GE 40 ESX-2LS | 40 | 62 | 28 | 22 | 6 | 150 | 500 |
GE 40 TXE-2LS | 40 | 62 | 28 | 22 | 6 | 280 | 465 |
GE 40 CJ2 | 40 | 62 | 28 | 22 | 7 | 100 | 250 |
GE 40 ES | 40 | 62 | 28 | 22 | 7 | 100 | 500 |
GE 40 TXG3E-2LS | 40 | 62 | 28 | 22 | 7 | 280 | 465 |
GEM 40 ES-2LS | 40 | 62 | 38 | 22 | 4 | 100 | 500 |
GEM 40 ES-2RS | 40 | 62 | 38 | 22 | 4 | 100 | 500 |
GEM 40 ESL-2LS | 40 | 62 | 38 | 22 | 4 | 100 | 500 |
GEM 40 ESX-2LS | 40 | 62 | 38 | 22 | 4 | 150 | 500 |
GEG 40 ES | 40 | 62 | 40 | 22 | 4 | 100 | 500 |
GEH 40 ES-2LS | 40 | 68 | 40 | 25 | 17 | 127 | 640 |
GEH 40 ES-2RS | 40 | 68 | 40 | 25 | 17 | 127 | 640 |
GEH 40 ESL-2LS | 40 | 68 | 40 | 25 | 17 | 127 | 640 |
GEH 40 ESX-2LS | 40 | 68 | 40 | 25 | 17 | 190 | 640 |
GEH 40 TXE-2LS | 40 | 68 | 40 | 25 | 17 | 360 | 600 |
GEH 40 TXG3E-2LS | 40 | 68 | 40 | 25 | 17 | 360 | 600 |
GEZ 112 ES | 44.45 | 71.438 | 38.887 | 33.325 | 6 | 170 | 510 |
GEZ 112 ES-2LS | 44.45 | 71.438 | 38.887 | 33.325 | 6 | 170 | 510 |
GEZ 112 ES-2RS | 44.45 | 71.438 | 38.887 | 33.325 | 6 | 170 | 510 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GEZ 112 ESL-2LS | 44.45 | 71.438 | 38.887 | 33.325 | 6 | 170 | 510 |
GEZ 112 ESX-2LS | 44.45 | 71.438 | 38.887 | 33.325 | 6 | 255 | 510 |
GEZ 112 TXE-2LS | 44.45 | 71.438 | 38.887 | 33.325 | 6 | 255 | 510 |
GEZM 112 ES-2LS | 44.45 | 71.438 | 66.675 | 33.325 | 5 | 170 | 510 |
GEZM 112 ES-2RS | 44.45 | 71.438 | 66.675 | 33.325 | 5 | 170 | 510 |
GEZM 112 ESX-2LS | 44.45 | 71.438 | 66.675 | 33.325 | 5 | 255 | 510 |
GEZM 112 ES | 44.45 | 71.438 | 66.675 | 33.325 | 9 | 170 | 510 |
GEZH 112 ES | 44.45 | 80.963 | 46.228 | 38.1 | 7 | 224 | 670 |
GEZH 112 ES-2LS | 44.45 | 80.963 | 46.228 | 38.1 | 7 | 224 | 670 |
GEZH 112 ES-2RS | 44.45 | 80.963 | 46.228 | 38.1 | 7 | 224 | 670 |
GEZH 112 ESX-2LS | 44.45 | 80.963 | 46.228 | 38.1 | 7 | 335 | 670 |
GE 45 CJ2 | 45 | 68 | 32 | 25 | 7 | 127 | 320 |
GE 45 ES | 45 | 68 | 32 | 25 | 7 | 127 | 640 |
GE 45 ES-2LS | 45 | 68 | 32 | 25 | 7 | 127 | 640 |
GE 45 ES-2RS | 45 | 68 | 32 | 25 | 7 | 127 | 640 |
GE 45 ESL-2LS | 45 | 68 | 32 | 25 | 7 | 127 | 640 |
GE 45 ESX-2LS | 45 | 68 | 32 | 25 | 7 | 190 | 640 |
GE 45 TXE-2LS | 45 | 68 | 32 | 25 | 7 | 360 | 600 |
GE 45 TXG3E-2LS | 45 | 68 | 32 | 25 | 7 | 360 | 600 |
GEM 45 ES-2LS | 45 | 68 | 40 | 25 | 4 | 127 | 640 |
GEM 45 ES-2RS | 45 | 68 | 40 | 25 | 4 | 127 | 640 |
GEM 45 ESL-2LS | 45 | 68 | 40 | 25 | 4 | 127 | 640 |
GEM 45 ESX-2LS | 45 | 68 | 40 | 25 | 4 | 190 | 640 |
GEH 45 ES-2LS | 45 | 75 | 43 | 28 | 14 | 156 | 780 |
GEH 45 ES-2RS | 45 | 75 | 43 | 28 | 14 | 156 | 780 |
GEH 45 ESL-2LS | 45 | 75 | 43 | 28 | 14 | 156 | 780 |
GEH 45 ESX-2LS | 45 | 75 | 43 | 28 | 14 | 236 | 780 |
GEH 45 TXE-2LS | 45 | 75 | 43 | 28 | 14 | 440 | 735 |
GEH 45 TXG3E-2LS | 45 | 75 | 43 | 28 | 14 | 440 | 735 |
GE 50 CJ2 | 50 | 75 | 35 | 28 | 6 | 156 | 390 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GE 50 ES | 50 | 75 | 35 | 28 | 6 | 156 | 780 |
GE 50 ES-2LS | 50 | 75 | 35 | 28 | 6 | 156 | 780 |
GE 50 ES-2RS | 50 | 75 | 35 | 28 | 6 | 156 | 780 |
GE 50 ESL-2LS | 50 | 75 | 35 | 28 | 6 | 156 | 780 |
GE 50 ESX-2LS | 50 | 75 | 35 | 28 | 6 | 236 | 780 |
GE 50 TXE-2LS | 50 | 75 | 35 | 28 | 6 | 440 | 735 |
GE 50 TXG3E-2LS | 50 | 75 | 35 | 28 | 6 | 440 | 735 |
GEM 50 ES-2LS | 50 | 75 | 43 | 28 | 4 | 156 | 780 |
GEM 50 ES-2RS | 50 | 75 | 43 | 28 | 4 | 156 | 780 |
GEM 50 ESL-2LS | 50 | 75 | 43 | 28 | 4 | 156 | 780 |
GEM 50 ESX-2LS | 50 | 75 | 43 | 28 | 4 | 236 | 780 |
GEG 50 ES | 50 | 75 | 50 | 28 | 4 | 156 | 780 |
GEH 50 ES-2LS | 50 | 90 | 56 | 36 | 17 | 245 | 1 220 |
GEH 50 ES-2RS | 50 | 90 | 56 | 36 | 17 | 245 | 1 220 |
GEH 50 ESL-2LS | 50 | 90 | 56 | 36 | 17 | 245 | 1 220 |
GEH 50 ESX-2LS | 50 | 90 | 56 | 36 | 17 | 365 | 1 220 |
GEH 50 TXE-2LS | 50 | 90 | 56 | 36 | 17 | 695 | 1 160 |
GEH 50 TXG3E-2LS | 50 | 90 | 56 | 36 | 17 | 695 | 1 160 |
GEZ 200 ES | 50.8 | 80.963 | 44.45 | 38.1 | 6 | 224 | 670 |
GEZ 200 ES-2LS | 50.8 | 80.963 | 44.45 | 38.1 | 6 | 224 | 670 |
GEZ 200 ES-2RS | 50.8 | 80.963 | 44.45 | 38.1 | 6 | 224 | 670 |
GEZ 200 ESL-2LS | 50.8 | 80.963 | 44.45 | 38.1 | 6 | 224 | 670 |
GEZ 200 ESX-2LS | 50.8 | 80.963 | 44.45 | 38.1 | 6 | 335 | 670 |
GEZ 200 TXE-2LS | 50.8 | 80.963 | 44.45 | 38.1 | 6 | 335 | 670 |
GEZM 200 ES-2LS | 50.8 | 80.963 | 76.2 | 38.1 | 5 | 224 | 670 |
GEZM 200 ES-2RS | 50.8 | 80.963 | 76.2 | 38.1 | 5 | 224 | 670 |
GEZM 200 ESX-2LS | 50.8 | 80.963 | 76.2 | 38.1 | 5 | 335 | 670 |
GEZM 200 ES | 50.8 | 80.963 | 76.2 | 38.1 | 9 | 224 | 670 |
GEZH 200 ES | 50.8 | 90.488 | 52.578 | 42.85 | 8 | 280 | 850 |
GEZH 200 ES-2LS | 50.8 | 90.488 | 52.578 | 42.85 | 8 | 280 | 850 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GEZH 200 ES-2RS | 50.8 | 90.488 | 52.578 | 42.85 | 8 | 280 | 850 |
GEZH 200 ESX-2LS | 50.8 | 90.488 | 52.578 | 42.85 | 8 | 425 | 850 |
GEZ 204 ES | 57.15 | 90.488 | 50.013 | 42.85 | 6 | 280 | 850 |
GEZ 204 ES-2LS | 57.15 | 90.488 | 50.013 | 42.85 | 6 | 280 | 850 |
GEZ 204 ES-2RS | 57.15 | 90.488 | 50.013 | 42.85 | 6 | 280 | 850 |
GEZ 204 ESL-2LS | 57.15 | 90.488 | 50.013 | 42.85 | 6 | 280 | 850 |
GEZ 204 ESX-2LS | 57.15 | 90.488 | 50.013 | 42.85 | 6 | 425 | 850 |
GEZ 204 TXE-2LS | 57.15 | 90.488 | 50.013 | 42.85 | 6 | 425 | 850 |
GEZM 204 ES-2LS | 57.15 | 90.488 | 85.725 | 42.85 | 5 | 280 | 850 |
GEZM 204 ES-2RS | 57.15 | 90.488 | 85.725 | 42.85 | 5 | 280 | 850 |
GEZM 204 ESX-2LS | 57.15 | 90.488 | 85.725 | 42.85 | 5 | 425 | 850 |
GEZM 204 ES | 57.15 | 90.488 | 85.725 | 42.85 | 9 | 280 | 850 |
GEZH 204 ES | 57.15 | 100.013 | 58.877 | 47.625 | 8 | 345 | 1 040 |
GEZH 204 ES-2LS | 57.15 | 100.013 | 58.877 | 47.625 | 8 | 345 | 1 040 |
GEZH 204 ES-2RS | 57.15 | 100.013 | 58.877 | 47.625 | 8 | 345 | 1 040 |
GEZH 204 ESX-2LS | 57.15 | 100.013 | 58.877 | 47.625 | 8 | 520 | 1 040 |
GE 60 CJ2 | 60 | 90 | 44 | 36 | 6 | 245 | 610 |
GE 60 ES | 60 | 90 | 44 | 36 | 6 | 245 | 1 220 |
GE 60 ES-2LS | 60 | 90 | 44 | 36 | 6 | 245 | 1 220 |
GE 60 ES-2RS | 60 | 90 | 44 | 36 | 6 | 245 | 1 220 |
GE 60 ESL-2LS | 60 | 90 | 44 | 36 | 6 | 245 | 1 220 |
GE 60 ESX-2LS | 60 | 90 | 44 | 36 | 6 | 365 | 1 220 |
GE 60 TXE-2LS | 60 | 90 | 44 | 36 | 6 | 695 | 1 160 |
GE 60 TXG3E-2LS | 60 | 90 | 44 | 36 | 6 | 695 | 1 160 |
GEM 60 ES-2LS | 60 | 90 | 54 | 36 | 3 | 245 | 1 220 |
GEM 60 ES-2RS | 60 | 90 | 54 | 36 | 3 | 245 | 1 220 |
GEM 60 ESL-2LS | 60 | 90 | 54 | 36 | 3 | 245 | 1 220 |
GEM 60 ESX-2LS | 60 | 90 | 54 | 36 | 3 | 365 | 1 220 |
GEH 60 ES-2LS | 60 | 105 | 63 | 40 | 17 | 315 | 1 560 |
GEH 60 ES-2RS | 60 | 105 | 63 | 40 | 17 | 315 | 1 560 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GEH 60 ESL-2LS | 60 | 105 | 63 | 40 | 17 | 315 | 1 560 |
GEH 60 ESX-2LS | 60 | 105 | 63 | 40 | 17 | 465 | 1 560 |
GEH 60 TXE-2LS | 60 | 105 | 63 | 40 | 17 | 880 | 1 460 |
GEH 60 TXG3A-2LS | 60 | 105 | 63 | 40 | 17 | 880 | 1 460 |
GEG 63 ES | 63 | 95 | 63 | 36 | 4 | 255 | 1 270 |
GEZ 208 ES | 63.5 | 100.013 | 55.55 | 47.625 | 6 | 345 | 1 040 |
GEZ 208 ES-2LS | 63.5 | 100.013 | 55.55 | 47.625 | 6 | 345 | 1 040 |
GEZ 208 ES-2RS | 63.5 | 100.013 | 55.55 | 47.625 | 6 | 345 | 1 040 |
GEZ 208 ESL-2LS | 63.5 | 100.013 | 55.55 | 47.625 | 6 | 345 | 1 040 |
GEZ 208 ESX-2LS | 63.5 | 100.013 | 55.55 | 47.625 | 6 | 520 | 1 040 |
GEZ 208 TXE-2LS | 63.5 | 100.013 | 55.55 | 47.625 | 6 | 520 | 1 040 |
GEZM 208 ES-2LS | 63.5 | 100.013 | 95.25 | 47.625 | 5 | 345 | 1 040 |
GEZM 208 ES-2RS | 63.5 | 100.013 | 95.25 | 47.625 | 5 | 345 | 1 040 |
GEZM 208 ESX-2LS | 63.5 | 100.013 | 95.25 | 47.625 | 5 | 520 | 1 040 |
GEZM 208 ES | 63.5 | 100.013 | 95.25 | 47.625 | 9 | 345 | 1 040 |
GEZH 208 ES | 63.5 | 111.125 | 64.643 | 52.375 | 8 | 425 | 1 270 |
GEZH 208 ES-2LS | 63.5 | 111.125 | 64.643 | 52.375 | 8 | 425 | 1 270 |
GEZH 208 ESX-2LS | 63.5 | 111.125 | 64.643 | 52.375 | 8 | 630 | 1 270 |
GEZ 212 ES | 69.85 | 111.125 | 61.112 | 52.375 | 6 | 425 | 1 270 |
GEZ 212 ES-2LS | 69.85 | 111.125 | 61.112 | 52.375 | 6 | 425 | 1 270 |
GEZ 212 ES-2RS | 69.85 | 111.125 | 61.112 | 52.375 | 6 | 425 | 1 270 |
GEZ 212 ESL-2LS | 69.85 | 111.125 | 61.112 | 52.375 | 6 | 425 | 1 270 |
GEZ 212 ESX-2LS | 69.85 | 111.125 | 61.112 | 52.375 | 6 | 630 | 1 270 |
GEZ 212 TXE-2LS | 69.85 | 111.125 | 61.112 | 52.375 | 6 | 630 | 1 270 |
GEZM 212 ES-2LS | 69.85 | 111.125 | 104.775 | 52.375 | 5 | 420 | 1 270 |
GEZM 212 ES-2RS | 69.85 | 111.125 | 104.775 | 52.375 | 5 | 425 | 1 270 |
GEZM 212 ESX-2LS | 69.85 | 111.125 | 104.775 | 52.375 | 5 | 630 | 1 270 |
GEZM 212 ES | 69.85 | 111.125 | 104.775 | 52.375 | 9 | 425 | 1 270 |
GEZH 212 ES | 69.85 | 120.65 | 70.866 | 57.15 | 8 | 500 | 1 500 |
GEZH 212 ES-2LS | 69.85 | 120.65 | 70.866 | 57.15 | 8 | 500 | 1 500 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GEZH 212 ES-2RS | 69.85 | 120.65 | 70.866 | 57.15 | 8 | 500 | 1 500 |
GEZH 212 ESX-2LS | 69.85 | 120.65 | 70.866 | 57.15 | 8 | 750 | 1 500 |
GE 70 ES | 70 | 105 | 49 | 40 | 6 | 315 | 1 560 |
GE 70 ES-2LS | 70 | 105 | 49 | 40 | 6 | 315 | 1 560 |
GE 70 ES-2RS | 70 | 105 | 49 | 40 | 6 | 315 | 1 560 |
GE 70 ESL-2LS | 70 | 105 | 49 | 40 | 6 | 315 | 1 560 |
GE 70 ESX-2LS | 70 | 105 | 49 | 40 | 6 | 465 | 1 560 |
GE 70 TXE-2LS | 70 | 105 | 49 | 40 | 6 | 880 | 1 460 |
GE 70 TXG3A-2LS | 70 | 105 | 49 | 40 | 6 | 880 | 1 460 |
GEM 70 ES-2LS | 70 | 105 | 65 | 40 | 4 | 315 | 1 560 |
GEM 70 ES-2RS | 70 | 105 | 65 | 40 | 4 | 315 | 1 560 |
GEM 70 ESL-2LS | 70 | 105 | 65 | 40 | 4 | 315 | 1 560 |
GEM 70 ESX-2LS | 70 | 105 | 65 | 40 | 4 | 465 | 1 560 |
GEH 70 ES-2LS | 70 | 120 | 70 | 45 | 16 | 400 | 2 000 |
GEH 70 ES-2RS | 70 | 120 | 70 | 45 | 16 | 400 | 2 000 |
GEH 70 ESL-2LS | 70 | 120 | 70 | 45 | 16 | 400 | 2 000 |
GEH 70 ESX-2LS | 70 | 120 | 70 | 45 | 16 | 600 | 2 000 |
GEH 70 TXE-2LS | 70 | 120 | 70 | 45 | 16 | 1 140 | 1 900 |
GEH 70 TXG3A-2LS | 70 | 120 | 70 | 45 | 16 | 1 140 | 1 900 |
GEZ 300 ES | 76.2 | 120.65 | 66.675 | 57.15 | 6 | 500 | 1 500 |
GEZ 300 ES-2LS | 76.2 | 120.65 | 66.675 | 57.15 | 6 | 500 | 1 500 |
GEZ 300 ES-2RS | 76.2 | 120.65 | 66.675 | 57.15 | 6 | 500 | 1 500 |
GEZ 300 ESL-2LS | 76.2 | 120.65 | 66.675 | 57.15 | 6 | 500 | 1 500 |
GEZ 300 ESX-2LS | 76.2 | 120.65 | 66.675 | 57.15 | 6 | 750 | 1 500 |
GEZ 300 TXE-2LS | 76.2 | 120.65 | 66.675 | 57.15 | 6 | 750 | 1 500 |
GEZM 300 ES-2LS | 76.2 | 120.65 | 114.3 | 57.15 | 5 | 500 | 1 500 |
GEZM 300 ES-2RS | 76.2 | 120.65 | 114.3 | 57.15 | 5 | 500 | 1 500 |
GEZM 300 ESX-2LS | 76.2 | 120.65 | 114.3 | 57.15 | 5 | 750 | 1 500 |
GEZM 300 ES | 76.2 | 120.65 | 114.3 | 57.15 | 9 | 500 | 1 500 |
GEZH 300 ES | 76.2 | 130.175 | 76.759 | 61.9 | 8 | 585 | 1 760 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GEZH 300 ES-2LS | 76.2 | 130.175 | 76.759 | 61.9 | 8 | 585 | 1 760 |
GEZH 300 ES-2RS | 76.2 | 130.175 | 76.759 | 61.9 | 8 | 585 | 1 760 |
GEZH 300 ESX-2LS | 76.2 | 130.175 | 76.759 | 61.9 | 8 | 880 | 1 760 |
GE 80 ES-2LS | 80 | 120 | 55 | 45 | 5 | 400 | 2 000 |
GE 80 ES-2RS | 80 | 120 | 55 | 45 | 5 | 400 | 2 000 |
GE 80 ESL-2LS | 80 | 120 | 55 | 45 | 5 | 400 | 2 000 |
GE 80 ESX-2LS | 80 | 120 | 55 | 45 | 5 | 600 | 2 000 |
GE 80 TXE-2LS | 80 | 120 | 55 | 45 | 5 | 1 140 | 1 900 |
GE 80 ES | 80 | 120 | 55 | 45 | 6 | 400 | 2 000 |
GE 80 TXG3A-2LS | 80 | 120 | 55 | 45 | 6 | 1 140 | 1 900 |
GEM 80 ES-2LS | 80 | 120 | 74 | 45 | 4 | 400 | 2 000 |
GEM 80 ES-2RS | 80 | 120 | 74 | 45 | 4 | 400 | 2 000 |
GEM 80 ESL-2LS | 80 | 120 | 74 | 45 | 4 | 400 | 2 000 |
GEM 80 ESX-2LS | 80 | 120 | 74 | 45 | 4 | 600 | 2 000 |
GEG 80 ES | 80 | 120 | 80 | 45 | 4 | 400 | 2 000 |
GEH 80 ES-2LS | 80 | 130 | 75 | 50 | 14 | 490 | 2 450 |
GEH 80 ES-2RS | 80 | 130 | 75 | 50 | 14 | 490 | 2 450 |
GEH 80 ESL-2LS | 80 | 130 | 75 | 50 | 14 | 490 | 2 450 |
GEH 80 ESX-2LS | 80 | 130 | 75 | 50 | 14 | 735 | 2 450 |
GEH 80 TXE-2LS | 80 | 130 | 75 | 50 | 14 | 1 370 | 2 320 |
GEH 80 TXG3A-2LS | 80 | 130 | 75 | 50 | 14 | 1 370 | 2 320 |
GEZ 304 ES | 82.55 | 130.175 | 72.238 | 61.9 | 6 | 585 | 1 760 |
GEZ 304 ES-2LS | 82.55 | 130.175 | 72.238 | 61.9 | 6 | 585 | 1 760 |
GEZ 304 ES-2RS | 82.55 | 130.175 | 72.238 | 61.9 | 6 | 585 | 1 760 |
GEZ 304 ESL-2LS | 82.55 | 130.175 | 72.238 | 61.9 | 6 | 585 | 1 760 |
GEZ 304 ESX-2LS | 82.55 | 130.175 | 72.238 | 61.9 | 6 | 880 | 1 760 |
GEZ 304 TXE-2LS | 82.55 | 130.175 | 72.238 | 61.9 | 6 | 880 | 1 760 |
GEZM 304 ES-2LS | 82.55 | 130.175 | 123.825 | 61.9 | 5 | 580 | 1 760 |
GEZM 304 ES-2RS | 82.55 | 130.175 | 123.825 | 61.9 | 5 | 585 | 1 760 |
GEZM 304 ESX-2LS | 82.55 | 130.175 | 123.825 | 61.9 | 5 | 880 | 1 760 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GEZM 304 ES | 82.55 | 130.175 | 123.825 | 61.9 | 9 | 585 | 1 760 |
GEZH 304 ES | 82.55 | 139.7 | 82.931 | 66.675 | 9 | 680 | 2 040 |
GEZH 304 ES-2LS | 82.55 | 139.7 | 82.931 | 66.675 | 9 | 680 | 2 040 |
GEZH 304 ES-2RS | 82.55 | 139.7 | 82.931 | 66.675 | 9 | 680 | 2 040 |
GEZH 304 ESX-2LS | 82.55 | 139.7 | 82.931 | 66.675 | 9 | 1 020 | 2 040 |
GEZ 308 ES | 88.9 | 139.7 | 77.775 | 66.675 | 6 | 680 | 2 040 |
GEZ 308 ES-2LS | 88.9 | 139.7 | 77.775 | 66.675 | 6 | 680 | 2 040 |
GEZ 308 ES-2RS | 88.9 | 139.7 | 77.775 | 66.675 | 6 | 680 | 2 040 |
GEZ 308 ESL-2LS | 88.9 | 139.7 | 77.775 | 66.675 | 6 | 680 | 2 040 |
GEZ 308 ESX-2LS | 88.9 | 139.7 | 77.775 | 66.675 | 6 | 1 020 | 2 040 |
GEZ 308 TXE-2LS | 88.9 | 139.7 | 77.775 | 66.675 | 6 | 1 020 | 2 040 |
GEZM 308 ES-2LS | 88.9 | 139.7 | 133.35 | 66.675 | 5 | 680 | 2 040 |
GEZM 308 ES-2RS | 88.9 | 139.7 | 133.35 | 66.675 | 5 | 680 | 2 040 |
GEZM 308 ESX-2LS | 88.9 | 139.7 | 133.35 | 66.675 | 5 | 1 020 | 2 040 |
GEZM 308 ES | 88.9 | 139.7 | 133.35 | 66.675 | 9 | 680 | 2 040 |
GEZH 308 ES | 88.9 | 149.225 | 90.424 | 71.425 | 9 | 780 | 2 360 |
GEZH 308 ES-2LS | 88.9 | 149.225 | 90.424 | 71.425 | 9 | 780 | 2 360 |
GEZH 308 ES-2RS | 88.9 | 149.225 | 90.424 | 71.425 | 9 | 780 | 2 360 |
GEZH 308 ESX-2LS | 88.9 | 149.225 | 90.424 | 71.425 | 9 | 1 180 | 2 360 |
GE 90 ES | 90 | 130 | 60 | 50 | 5 | 490 | 2 450 |
GE 90 ES-2LS | 90 | 130 | 60 | 50 | 5 | 490 | 2 450 |
GE 90 ES-2RS | 90 | 130 | 60 | 50 | 5 | 490 | 2 450 |
GE 90 ESL-2LS | 90 | 130 | 60 | 50 | 5 | 490 | 2 450 |
GE 90 ESX-2LS | 90 | 130 | 60 | 50 | 5 | 735 | 2 450 |
GE 90 TXE-2LS | 90 | 130 | 60 | 50 | 5 | 1 370 | 2 320 |
GE 90 TXG3A-2LS | 90 | 130 | 60 | 50 | 5 | 1 370 | 2 320 |
GEH 90 ES-2RS | 90 | 150 | 85 | 55 | 15 | 610 | 3 050 |
GEH 90 ESL-2LS | 90 | 150 | 85 | 55 | 15 | 610 | 3 050 |
GEH 90 ESX-2LS | 90 | 150 | 85 | 55 | 15 | 915 | 3 050 |
GEH 90 TXE-2LS | 90 | 150 | 85 | 55 | 15 | 1 730 | 2 850 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GEH 90 TXG3A-2LS | 90 | 150 | 85 | 55 | 15 | 1 730 | 2 850 |
GEZ 312 ES | 95.25 | 149.225 | 83.337 | 71.425 | 6 | 780 | 2 360 |
GEZ 312 ES-2LS | 95.25 | 149.225 | 83.337 | 71.425 | 6 | 780 | 2 360 |
GEZ 312 ES-2RS | 95.25 | 149.225 | 83.337 | 71.425 | 6 | 780 | 2 360 |
GEZ 312 ESL-2LS | 95.25 | 149.225 | 83.337 | 71.425 | 6 | 780 | 2 360 |
GEZ 312 ESX-2LS | 95.25 | 149.225 | 83.337 | 71.425 | 6 | 1 180 | 2 360 |
GEZ 312 TXE-2LS | 95.25 | 149.225 | 83.337 | 71.425 | 6 | 1 180 | 2 360 |
GEZM 312 ES-2LS | 95.25 | 149.225 | 142.875 | 71.425 | 5 | 780 | 2 360 |
GEZM 312 ES-2RS | 95.25 | 149.225 | 142.875 | 71.425 | 5 | 780 | 2 360 |
GEZM 312 ESX-2LS | 95.25 | 149.225 | 142.875 | 71.425 | 5 | 1 180 | 2 360 |
GEZM 312 ES | 95.25 | 149.225 | 142.875 | 71.425 | 9 | 780 | 2 360 |
GEZH 312 ES | 95.25 | 158.75 | 94.945 | 76.2 | 9 | 900 | 2 650 |
GEZH 312 ES-2LS | 95.25 | 158.75 | 94.945 | 76.2 | 9 | 900 | 2 650 |
GEZH 312 ES-2RS | 95.25 | 158.75 | 94.945 | 76.2 | 9 | 900 | 2 650 |
GEZH 312 ESX-2LS | 95.25 | 158.75 | 94.945 | 76.2 | 9 | 1 340 | 2 650 |
GE 100 ES-2LS | 100 | 150 | 70 | 55 | 6 | 610 | 3 050 |
GE 100 ES-2RS | 100 | 150 | 70 | 55 | 6 | 610 | 3 050 |
GE 100 ESL-2LS | 100 | 150 | 70 | 55 | 6 | 610 | 3 050 |
GE 100 ESX-2LS | 100 | 150 | 70 | 55 | 6 | 915 | 3 050 |
GE 100 TXE-2LS | 100 | 150 | 70 | 55 | 6 | 1 730 | 2 850 |
GE 100 TXG3A-2LS | 100 | 150 | 70 | 55 | 6 | 1 730 | 2 850 |
GE 100 ES | 100 | 150 | 70 | 55 | 7 | 610 | 3 050 |
GEP 100 FS | 100 | 150 | 71 | 67 | 2 | 600 | 900 |
GEG 100 ES | 100 | 150 | 100 | 55 | 4 | 610 | 3 050 |
GEH 100 ES-2LS | 100 | 160 | 85 | 55 | 13 | 655 | 3 250 |
GEH 100 ES-2RS | 100 | 160 | 85 | 55 | 13 | 655 | 3 250 |
GEH 100 ESL-2LS | 100 | 160 | 85 | 55 | 13 | 655 | 3 250 |
GEH 100 ESX-2LS | 100 | 160 | 85 | 55 | 13 | 980 | 3 250 |
GEH 100 TXE-2LS | 100 | 160 | 85 | 55 | 13 | 1 860 | 3 100 |
GEH 100 TXG3A-2LS | 100 | 160 | 85 | 55 | 13 | 1 860 | 3 100 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GEZ 400 ES | 101.6 | 158.75 | 88.9 | 76.2 | 6 | 900 | 2 650 |
GEZ 400 ES-2LS | 101.6 | 158.75 | 88.9 | 76.2 | 6 | 900 | 2 650 |
GEZ 400 ES-2RS | 101.6 | 158.75 | 88.9 | 76.2 | 6 | 900 | 2 650 |
GEZ 400 ESL-2LS | 101.6 | 158.75 | 88.9 | 76.2 | 6 | 900 | 2 650 |
GEZ 400 ESX-2LS | 101.6 | 158.75 | 88.9 | 76.2 | 6 | 1 340 | 2 650 |
GEZ 400 TXE-2LS | 101.6 | 158.75 | 88.9 | 76.2 | 6 | 1 340 | 2 650 |
GEZM 400 ES-2LS | 101.6 | 158.75 | 152.4 | 76.2 | 5 | 900 | 2 650 |
GEZM 400 ES-2RS | 101.6 | 158.75 | 152.4 | 76.2 | 5 | 900 | 2 650 |
GEZM 400 ESX-2LS | 101.6 | 158.75 | 152.4 | 76.2 | 5 | 1 340 | 2 650 |
GEZM 400 ES | 101.6 | 158.75 | 152.4 | 76.2 | 9 | 900 | 2 650 |
GEZH 400 ES | 101.6 | 177.8 | 107.315 | 85.725 | 9 | 1 120 | 3 400 |
GEZH 400 ES-2LS | 101.6 | 177.8 | 107.315 | 85.725 | 9 | 1 120 | 3 400 |
GEZH 400 ES-2RS | 101.6 | 177.8 | 107.315 | 85.725 | 9 | 1 120 | 3 400 |
GEZH 400 ESX-2LS | 101.6 | 177.8 | 107.315 | 85.725 | 9 | 1 700 | 3 400 |
GE 110 ES | 110 | 160 | 70 | 55 | 6 | 655 | 3 250 |
GE 110 ES-2LS | 110 | 160 | 70 | 55 | 6 | 655 | 3 250 |
GE 110 ES-2RS | 110 | 160 | 70 | 55 | 6 | 655 | 3 250 |
GE 110 ESL-2LS | 110 | 160 | 70 | 55 | 6 | 655 | 3 250 |
GE 110 ESX-2LS | 110 | 160 | 70 | 55 | 6 | 980 | 3 250 |
GE 110 TXE-2LS | 110 | 160 | 70 | 55 | 6 | 1 860 | 3 100 |
GE 110 TXG3A-2LS | 110 | 160 | 70 | 55 | 6 | 1 860 | 3 100 |
GEP 110 FS | 110 | 160 | 78 | 74 | 2 | 720 | 1 080 |
GEH 110 ES-2LS | 110 | 180 | 100 | 70 | 12 | 950 | 4 750 |
GEH 110 ES-2RS | 110 | 180 | 100 | 70 | 12 | 950 | 4 750 |
GEH 110 ESL-2LS | 110 | 180 | 100 | 70 | 12 | 950 | 4 750 |
GEH 110 ESX-2LS | 110 | 180 | 100 | 70 | 12 | 1 430 | 4 750 |
GEH 110 TXA-2LS | 110 | 180 | 100 | 70 | 12 | 2 700 | 4 500 |
GEH 110 TXG3A-2LS | 110 | 180 | 100 | 70 | 12 | 2 700 | 4 500 |
GEZ 408 ES | 114.3 | 177.8 | 100 | 85.725 | 6 | 1 120 | 3 400 |
GEZ 408 ES-2LS | 114.3 | 177.8 | 100 | 85.725 | 6 | 1 120 | 3 400 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GEZ 408 ES-2RS | 114.3 | 177.8 | 100 | 85.725 | 6 | 1 120 | 3 400 |
GEZ 408 ESL-2LS | 114.3 | 177.8 | 100 | 85.725 | 6 | 1 120 | 3 400 |
GEZ 408 ESX-2LS | 114.3 | 177.8 | 100 | 85.725 | 6 | 1 700 | 3 400 |
GEZ 408 TXA-2LS | 114.3 | 177.8 | 100 | 85.725 | 6 | 1 700 | 3 400 |
GEZM 408 ES-2LS | 114.3 | 177.8 | 171.45 | 85.725 | 5 | 1 120 | 3 400 |
GEZM 408 ES-2RS | 114.3 | 177.8 | 171.45 | 85.725 | 5 | 1 120 | 3 400 |
GEZM 408 ESX-2LS | 114.3 | 177.8 | 171.45 | 85.725 | 5 | 1 700 | 3 400 |
GEZM 408 ES | 114.3 | 177.8 | 171.45 | 85.725 | 7 | 1 120 | 3 400 |
GEZH 408 ES | 114.3 | 196.85 | 119.126 | 95.25 | 9 | 1 400 | 4 150 |
GEZH 408 ES-2LS | 114.3 | 196.85 | 119.126 | 95.25 | 9 | 1 400 | 4 150 |
GEZH 408 ES-2RS | 114.3 | 196.85 | 119.126 | 95.25 | 9 | 1 400 | 4 150 |
GEZH 408 ESX-2LS | 114.3 | 196.85 | 119.126 | 95.25 | 9 | 2 080 | 4 150 |
GE 120 ES | 120 | 180 | 85 | 70 | 6 | 950 | 4 750 |
GE 120 ES-2LS | 120 | 180 | 85 | 70 | 6 | 950 | 4 750 |
GE 120 ES-2RS | 120 | 180 | 85 | 70 | 6 | 950 | 4 750 |
GE 120 ESL-2LS | 120 | 180 | 85 | 70 | 6 | 950 | 4 750 |
GE 120 ESX-2LS | 120 | 180 | 85 | 70 | 6 | 1 430 | 4 750 |
GE 120 TXA-2LS | 120 | 180 | 85 | 70 | 6 | 2 700 | 4 500 |
GE 120 TXG3A-2LS | 120 | 180 | 85 | 70 | 6 | 2 700 | 4 500 |
GEP 120 FS | 120 | 180 | 85 | 80 | 2 | 850 | 1 270 |
GEH 120 ES-2RS | 120 | 210 | 115 | 70 | 16 | 1 080 | 5 400 |
GEH 120 ESL-2LS | 120 | 210 | 115 | 70 | 16 | 1 080 | 5 400 |
GEH 120 ESX-2LS | 120 | 210 | 115 | 70 | 16 | 1 600 | 5 400 |
GEH 120 TXA-2LS | 120 | 210 | 115 | 70 | 16 | 3 000 | 5 000 |
GEH 120 TXG3A-2LS | 120 | 210 | 115 | 70 | 16 | 3 000 | 5 000 |
GEZ 412 ES | 120.65 | 187.325 | 105.562 | 90.475 | 6 | 1 250 | 3 750 |
GEZ 412 ES-2LS | 120.65 | 187.325 | 105.562 | 90.475 | 6 | 1 250 | 3 750 |
GEZ 412 ESL-2LS | 120.65 | 187.325 | 105.562 | 90.475 | 6 | 1 250 | 3 750 |
GEZ 412 ESX-2LS | 120.65 | 187.325 | 105.562 | 90.475 | 6 | 1 900 | 3 750 |
GEZ 412 TXA-2LS | 120.65 | 187.325 | 105.562 | 90.475 | 6 | 1 900 | 3 750 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GEG 125 ES | 125 | 180 | 125 | 70 | 4 | 950 | 4 750 |
GEZ 500 ES | 127 | 196.85 | 111.125 | 95.25 | 6 | 1 400 | 4 150 |
GEZ 500 ES-2LS | 127 | 196.85 | 111.125 | 95.25 | 6 | 1 400 | 4 150 |
GEZ 500 ES-2RS | 127 | 196.85 | 111.125 | 95.25 | 6 | 1 400 | 4 150 |
GEZ 500 ESL-2LS | 127 | 196.85 | 111.125 | 95.25 | 6 | 1 400 | 4 150 |
GEZ 500 ESX-2LS | 127 | 196.85 | 111.125 | 95.25 | 6 | 2 080 | 4 150 |
GEZ 500 TXA-2LS | 127 | 196.85 | 111.125 | 95.25 | 6 | 2 080 | 4 150 |
GEZM 500 ES-2LS | 127 | 196.85 | 190.5 | 95.25 | 5 | 1 400 | 4 150 |
GEZM 500 ES-2RS | 127 | 196.85 | 190.5 | 95.25 | 5 | 1 400 | 4 150 |
GEZM 500 ESX-2LS | 127 | 196.85 | 190.5 | 95.25 | 5 | 2 080 | 4 150 |
GEZM 500 ES | 127 | 196.85 | 190.5 | 95.25 | 7 | 1 400 | 4 150 |
GEZH 508 ES | 139.7 | 222.25 | 125.73 | 104.775 | 7 | 1 730 | 5 200 |
GEZH 508 ES-2LS | 139.7 | 222.25 | 125.73 | 104.775 | 7 | 1 730 | 5 200 |
GEZH 508 ES-2RS | 139.7 | 222.25 | 125.73 | 104.775 | 7 | 1 730 | 5 200 |
GEZH 508 ESX-2LS | 139.7 | 222.25 | 125.73 | 104.775 | 7 | 2 600 | 5 200 |
GE 140 ES | 140 | 210 | 90 | 70 | 7 | 1 080 | 5 400 |
GE 140 ES-2LS | 140 | 210 | 90 | 70 | 7 | 1 080 | 5 400 |
GE 140 ES-2RS | 140 | 210 | 90 | 70 | 7 | 1 080 | 5 400 |
GE 140 ESL-2LS | 140 | 210 | 90 | 70 | 7 | 1 080 | 5 400 |
GE 140 ESX-2LS | 140 | 210 | 90 | 70 | 7 | 1 600 | 5 400 |
GE 140 TXA-2LS | 140 | 210 | 90 | 70 | 7 | 3 000 | 5 000 |
GE 140 TXG3A-2LS | 140 | 210 | 90 | 70 | 7 | 3 000 | 5 000 |
GEP 140 FS | 140 | 210 | 100 | 95 | 2 | 1 200 | 1 800 |
GEZ 600 ES | 152.4 | 222.25 | 120.65 | 104.775 | 5 | 1 730 | 5 200 |
GEZ 600 ES-2LS | 152.4 | 222.25 | 120.65 | 104.775 | 5 | 1 730 | 5 200 |
GEZ 600 ES-2RS | 152.4 | 222.25 | 120.65 | 104.775 | 5 | 1 730 | 5 200 |
GEZ 600 ESL-2LS | 152.4 | 222.25 | 120.65 | 104.775 | 5 | 1 730 | 5 200 |
GEZ 600 ESX-2LS | 152.4 | 222.25 | 120.65 | 104.775 | 5 | 2 600 | 5 200 |
GEZ 600 TXA-2LS | 152.4 | 222.25 | 120.65 | 104.775 | 5 | 2 600 | 5 200 |
GEZM 600 ES-2LS | 152.4 | 222.25 | 209.55 | 104.775 | 5 | 1 730 | 5 200 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GEZM 600 ES-2RS | 152.4 | 222.25 | 209.55 | 104.775 | 5 | 1 730 | 5 200 |
GEZM 600 ESX-2LS | 152.4 | 222.25 | 209.55 | 104.775 | 5 | 2 600 | 5 200 |
GEZM 600 ES | 152.4 | 222.25 | 209.55 | 104.775 | 7 | 1 730 | 5 200 |
GE 160 ES | 160 | 230 | 105 | 80 | 8 | 1 370 | 6 800 |
GE 160 ES-2LS | 160 | 230 | 105 | 80 | 8 | 1 370 | 6 800 |
GE 160 ES-2RS | 160 | 230 | 105 | 80 | 8 | 1 370 | 6 800 |
GE 160 ESL-2LS | 160 | 230 | 105 | 80 | 8 | 1 370 | 6 800 |
GE 160 ESX-2LS | 160 | 230 | 105 | 80 | 8 | 2 040 | 6 800 |
GE 160 TXA-2LS | 160 | 230 | 105 | 80 | 8 | 3 800 | 6 400 |
GE 160 TXG3A-2LS | 160 | 230 | 105 | 80 | 8 | 3 800 | 6 400 |
GEP 160 FS | 160 | 230 | 115 | 109 | 2 | 1 600 | 2 400 |
GEG 160 ES | 160 | 230 | 160 | 80 | 4 | 1 370 | 6 800 |
GE 180 ES | 180 | 260 | 105 | 80 | 6 | 1 530 | 7 650 |
GE 180 ES-2LS | 180 | 260 | 105 | 80 | 6 | 1 530 | 7 650 |
GE 180 ES-2RS | 180 | 260 | 105 | 80 | 6 | 1 530 | 7 650 |
GE 180 ESL-2LS | 180 | 260 | 105 | 80 | 6 | 1 530 | 7 650 |
GE 180 ESX-2LS | 180 | 260 | 105 | 80 | 6 | 2 280 | 7 650 |
GE 180 TXA-2LS | 180 | 260 | 105 | 80 | 6 | 4 300 | 7 200 |
GE 180 TXG3A-2LS | 180 | 260 | 105 | 80 | 6 | 4 300 | 7 200 |
GEP 180 FS | 180 | 260 | 128 | 122 | 2 | 2 080 | 3 100 |
GE 200 ES | 200 | 290 | 130 | 100 | 7 | 2 120 | 10 600 |
GE 200 ES-2LS | 200 | 290 | 130 | 100 | 7 | 2 120 | 10 600 |
GE 200 ES-2RS | 200 | 290 | 130 | 100 | 7 | 2 120 | 10 600 |
GE 200 ESL-2LS | 200 | 290 | 130 | 100 | 7 | 2 120 | 10 600 |
GE 200 ESX-2LS | 200 | 290 | 130 | 100 | 7 | 3 200 | 10 600 |
GE 200 TXA-2LS | 200 | 290 | 130 | 100 | 7 | 6 000 | 10 000 |
GE 200 TXG3A-2LS | 200 | 290 | 130 | 100 | 7 | 6 000 | 10 000 |
GEP 200 FS | 200 | 290 | 140 | 134 | 2 | 2 450 | 3 650 |
GEG 200 ES | 200 | 290 | 200 | 100 | 4 | 2 120 | 10 600 |
GE 220 ES-2LS | 220 | 320 | 135 | 100 | 8 | 2 320 | 11 600 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GE 220 ES-2RS | 220 | 320 | 135 | 100 | 8 | 2 320 | 11 600 |
GE 220 ESL-2LS | 220 | 320 | 135 | 100 | 8 | 2 320 | 11 600 |
GE 220 ESX-2LS | 220 | 320 | 135 | 100 | 8 | 3 550 | 11 600 |
GE 220 TXA-2LS | 220 | 320 | 135 | 100 | 8 | 6 550 | 11 000 |
GEP 220 FS | 220 | 320 | 155 | 148 | 2 | 3 050 | 4 550 |
GE 240 ES-2LS | 240 | 340 | 140 | 100 | 8 | 2 550 | 12 700 |
GE 240 ES-2RS | 240 | 340 | 140 | 100 | 8 | 2 550 | 12 700 |
GE 240 ESL-2LS | 240 | 340 | 140 | 100 | 8 | 2 550 | 12 700 |
GE 240 ESX-2LS | 240 | 340 | 140 | 100 | 8 | 3 800 | 12 700 |
GE 240 TXA-2LS | 240 | 340 | 140 | 100 | 8 | 7 200 | 12 000 |
GEP 240 FS | 240 | 340 | 170 | 162 | 2 | 3 550 | 5 400 |
GE 260 ES-2LS | 260 | 370 | 150 | 110 | 7 | 3 050 | 15 300 |
GE 260 ES-2RS | 260 | 370 | 150 | 110 | 7 | 3 050 | 15 300 |
GE 260 ESL-2LS | 260 | 370 | 150 | 110 | 7 | 3 050 | 15 300 |
GE 260 ESX-2LS | 260 | 370 | 150 | 110 | 7 | 4 550 | 15 300 |
GE 260 TXA-2LS | 260 | 370 | 150 | 110 | 7 | 8 650 | 14 300 |
GEP 260 FS | 260 | 370 | 185 | 175 | 2 | 4 250 | 6 400 |
GE 280 ES-2LS | 280 | 400 | 155 | 120 | 6 | 3 550 | 18 000 |
GE 280 ES-2RS | 280 | 400 | 155 | 120 | 6 | 3 550 | 18 000 |
GE 280 ESL-2LS | 280 | 400 | 155 | 120 | 6 | 3 550 | 18 000 |
GE 280 ESX-2LS | 280 | 400 | 155 | 120 | 6 | 5 400 | 18 000 |
GE 280 TXA-2LS | 280 | 400 | 155 | 120 | 6 | 10 000 | 16 600 |
GEP 280 FS | 280 | 400 | 200 | 190 | 2 | 5 000 | 7 500 |
GE 300 ES-2LS | 300 | 430 | 165 | 120 | 7 | 3 800 | 19 000 |
GE 300 ES-2RS | 300 | 430 | 165 | 120 | 7 | 3 800 | 19 000 |
GE 300 ESL-2LS | 300 | 430 | 165 | 120 | 7 | 3 800 | 19 000 |
GE 300 ESX-2LS | 300 | 430 | 165 | 120 | 7 | 5 700 | 19 000 |
GE 300 TXA-2LS | 300 | 430 | 165 | 120 | 7 | 10 800 | 18 000 |
GEP 300 FS | 300 | 430 | 212 | 200 | 2 | 5 600 | 8 300 |
GEC 320 FBAS | 320 | 440 | 160 | 135 | 4 | 3 000 | 4 500 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GEC 320 TXA-2RS | 320 | 440 | 160 | 135 | 4 | 14 000 | 23 200 |
GEP 320 FS | 320 | 460 | 230 | 218 | 2 | 6 400 | 9 650 |
GEC 340 FBAS | 340 | 460 | 160 | 135 | 3 | 3 150 | 4 750 |
GEC 340 TXA-2RS | 340 | 460 | 160 | 135 | 3 | 14 600 | 24 500 |
GEP 340 FS | 340 | 480 | 243 | 230 | 2 | 7 100 | 10 800 |
GEC 360 FBAS | 360 | 480 | 160 | 135 | 3 | 3 250 | 4 900 |
GEC 360 TXA-2RS | 360 | 480 | 160 | 135 | 3 | 15 300 | 25 500 |
GEP 360 FS | 360 | 520 | 258 | 243 | 2 | 8 150 | 12 200 |
GEC 380 FBAS | 380 | 520 | 190 | 160 | 4 | 4 300 | 6 550 |
GEC 380 TXA-2RS | 380 | 520 | 190 | 160 | 4 | 19 300 | 32 500 |
GEP 380 FS | 380 | 540 | 272 | 258 | 2 | 9 150 | 13 700 |
GEC 400 FBAS | 400 | 540 | 190 | 160 | 3 | 4 500 | 6 700 |
GEC 400 TXA-2RS | 400 | 540 | 190 | 160 | 3 | 20 400 | 34 000 |
GEP 400 FS | 400 | 580 | 280 | 265 | 2 | 9 650 | 14 600 |
GEC 420 FBAS | 420 | 560 | 190 | 160 | 3 | 4 650 | 6 950 |
GEC 420 TXA-2RS | 420 | 560 | 190 | 160 | 3 | 21 200 | 35 500 |
GEP 420 FS | 420 | 600 | 300 | 280 | 2 | 10 600 | 16 000 |
GEC 440 FBAS | 440 | 600 | 218 | 185 | 3 | 5 850 | 8 800 |
GEC 440 TXA-2RS | 440 | 600 | 218 | 185 | 3 | 26 000 | 43 000 |
GEP 440 FS | 440 | 630 | 315 | 300 | 2 | 12 200 | 18 600 |
GEC 460 FBAS | 460 | 620 | 218 | 185 | 3 | 6 000 | 9 000 |
GEC 460 TXA-2RS | 460 | 620 | 218 | 185 | 3 | 27 000 | 45 000 |
GEP 460 FS | 460 | 650 | 325 | 308 | 2 | 12 900 | 19 600 |
GEC 480 FBAS | 480 | 650 | 230 | 195 | 3 | 6 700 | 10 000 |
GEC 480 TXA-2RS | 480 | 650 | 230 | 195 | 3 | 30 000 | 50 000 |
GEP 480 FS | 480 | 680 | 340 | 320 | 2 | 14 300 | 21 200 |
GEC 500 TXA-2RS | 500 | 670 | 230 | 195 | 3 | 31 000 | 51 000 |
GEP 500 FS | 500 | 710 | 355 | 335 | 2 | 15 300 | 23 200 |
GEC 530 FBAS | 530 | 710 | 243 | 205 | 3 | 7 650 | 11 400 |
GEC 530 TXA-2RS | 530 | 710 | 243 | 205 | 3 | 34 500 | 57 000 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GEP 530 FS | 530 | 750 | 375 | 355 | 2 | 17 000 | 25 500 |
GEC 560 TXA-2RS | 560 | 750 | 258 | 215 | 3 | 38 000 | 63 000 |
GEC 560 FBAS | 560 | 750 | 258 | 215 | 4 | 8 500 | 12 700 |
GEP 560 FS | 560 | 800 | 400 | 380 | 2 | 19 600 | 29 000 |
GEC 600 FBAS | 600 | 800 | 272 | 230 | 3 | 9 800 | 14 600 |
GEC 600 TXA-2RS | 600 | 800 | 272 | 230 | 3 | 43 000 | 72 000 |
GEP 600 FS | 600 | 850 | 425 | 400 | 2 | 22 000 | 33 500 |
GEC 630 FBAS | 630 | 850 | 300 | 260 | 3 | 11 800 | 18 000 |
GEC 630 TXA-2RS | 630 | 850 | 300 | 260 | 3 | 52 000 | 86 500 |
GEP 630 FS | 630 | 900 | 450 | 425 | 2 | 24 500 | 37 500 |
GEC 670 FBAS | 670 | 900 | 308 | 260 | 3 | 12 500 | 18 600 |
GEC 670 TXA-2RS | 670 | 900 | 308 | 260 | 3 | 55 000 | 91 500 |
GEP 670 FS | 670 | 950 | 475 | 450 | 2 | 27 500 | 41 500 |
GEC 710 FBAS | 710 | 950 | 325 | 275 | 3 | 14 000 | 21 200 |
GEC 710 TXA-2RS | 710 | 950 | 325 | 275 | 3 | 62 000 | 102 000 |
GEP 710 FS | 710 | 1 000 | 500 | 475 | 2 | 31 000 | 46 500 |
GEC 750 FBAS | 750 | 1 000 | 335 | 280 | 3 | 15 000 | 22 400 |
GEC 750 TXA-2RS | 750 | 1 000 | 335 | 280 | 3 | 65 500 | 110 000 |
GEP 750 FS | 750 | 1 060 | 530 | 500 | 2 | 34 500 | 52 000 |
GEC 800 FBAS | 800 | 1 060 | 355 | 300 | 3 | 17 300 | 26 000 |
GEC 800 TXA-2RS | 800 | 1 060 | 355 | 300 | 3 | 75 000 | 125 000 |
GEP 800 FS | 800 | 1 120 | 565 | 530 | 2 | 39 000 | 58 500 |
GEC 850 FBAS | 850 | 1 120 | 365 | 310 | 3 | 18 600 | 28 000 |
GEP 850 FS | 850 | 1 220 | 600 | 565 | 2 | 45 000 | 67 000 |
GEC 900 FBAS | 900 | 1 180 | 375 | 320 | 3 | 20 400 | 31 000 |
GEP 900 FS | 900 | 1 250 | 635 | 600 | 2 | 49 000 | 73 500 |
GEC 950 FBAS | 950 | 1 250 | 400 | 340 | 3 | 23 200 | 34 500 |
GEP 950 FS | 950 | 1 360 | 670 | 635 | 2 | 56 000 | 85 000 |
GEC 1000 FBAS | 1 000 | 1 320 | 438 | 370 | 3 | 27 000 | 40 000 |
GEP 1000 FS | 1 000 | 1 450 | 710 | 670 | 2 | 63 000 | 95 000 |
Angular contact spherical plain bearings
Designation | Principal dimensions | Angle of tilt | Basic load ratings | |||
EASIER Bearing | dynamic | static | ||||
d[mm] | D[mm] | T[mm] | α[°] | C[kN] | C0[kN] | |
GAC 25 F | 25 | 47 | 15 | 2.7 | 24 | 38 |
GAC 30 F | 30 | 55 | 17 | 4.7 | 30 | 48 |
GAC 35 F | 35 | 62 | 18 | 4.2 | 35.5 | 57 |
GAC 40 F | 40 | 68 | 19 | 3.7 | 44 | 69.5 |
GAC 45 F | 45 | 75 | 20 | 3.4 | 50 | 80 |
GAC 50 F | 50 | 80 | 20 | 1.6 | 58.5 | 93 |
GAC 60 F | 60 | 95 | 23 | 1.7 | 78 | 125 |
GAC 70 F | 70 | 110 | 25 | 2.3 | 98 | 156 |
GAC 80 F | 80 | 125 | 29 | 3.5 | 122 | 193 |
GAC 90 F | 90 | 140 | 32 | 3.6 | 146 | 236 |
GAC 100 F | 100 | 150 | 32 | 0.8 | 186 | 300 |
GAC 110 F | 110 | 170 | 38 | 3 | 220 | 345 |
GAC 120 F | 120 | 180 | 38 | 0.7 | 260 | 415 |
Thrust spherical plain bearings
Designation | Principal dimensions | Angle of tilt | Basic load ratings | |||
dynamic | static | |||||
d[mm] | D[mm] | T[mm] | α[°] | C[kN] | C0[kN] | |
GX 17 F | 17 | 47 | 16 | 2.5 | 36.5 | 58.5 |
GX 20 F | 20 | 55 | 20 | 5 | 46.5 | 73.5 |
GX 25 F | 25 | 62 | 22.5 | 4 | 69.5 | 112 |
GX 30 F | 30 | 75 | 26 | 3.5 | 95 | 153 |
GX 35 F | 35 | 90 | 28 | 5 | 134 | 216 |
GX 40 F | 40 | 105 | 32 | 6 | 173 | 275 |
GX 45 F | 45 | 120 | 36.5 | 6 | 224 | 355 |
GX 50 F | 50 | 130 | 42.5 | 5.5 | 275 | 440 |
GX 60 F | 60 | 150 | 45 | 6 | 375 | 600 |
GX 70 F | 70 | 160 | 50 | 3.5 | 475 | 750 |
GX 80 F | 80 | 180 | 50 | 4 | 570 | 915 |
GX 100 F | 100 | 210 | 59 | 4.5 | 735 | 1 180 |
GX 120 F | 120 | 230 | 64 | 3.5 | 880 | 1 430 |
Radial spherical plain bearings
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GE 4 E | 4 | 12 | 5 | 3 | 16 | 2.04 | 10.2 |
GE 4 C | 4 | 12 | 5 | 3 | 16 | 2.16 | 5.4 |
GE 5 E | 5 | 14 | 6 | 4 | 13 | 3.4 | 17 |
GE 6 E | 6 | 14 | 6 | 4 | 13 | 3.4 | 17 |
GE 6 C | 6 | 14 | 6 | 4 | 13 | 3.6 | 9 |
GE 8 E | 8 | 16 | 8 | 5 | 15 | 5.5 | 27.5 |
GE 8 C | 8 | 16 | 8 | 5 | 15 | 5.85 | 14.6 |
GE 10 E | 10 | 19 | 9 | 6 | 12 | 8.15 | 40.5 |
GE 10 C | 10 | 19 | 9 | 6 | 12 | 8.65 | 21.6 |
GEH 10 C | 10 | 22 | 12 | 7 | 18 | 11.4 | 28.5 |
GE 12 E | 12 | 22 | 10 | 7 | 10 | 10.8 | 54 |
GE 12 C | 12 | 22 | 10 | 7 | 10 | 11.4 | 28.5 |
GE 12 TXGR | 12 | 22 | 10 | 7 | 10 | 30 | 50 |
GEG 12 ESA | 12 | 22 | 12 | 7 | 4 | 10.8 | 54 |
GEH 12 C | 12 | 26 | 15 | 9 | 18 | 18 | 45 |
GEZ 008 ES | 12.7 | 22.225 | 11.1 | 9.525 | 6 | 14 | 41.5 |
GEZM 008 ES | 12.7 | 22.225 | 19.05 | 9.525 | 9 | 14 | 41.5 |
GE 15 ES | 15 | 26 | 12 | 9 | 8 | 17 | 85 |
GE 15 C | 15 | 26 | 12 | 9 | 8 | 18 | 45 |
GE 15 TXGR | 15 | 26 | 12 | 9 | 8 | 47.5 | 80 |
GEH 15 C | 15 | 30 | 16 | 10 | 16 | 22.4 | 56 |
GEZ 010 ES | 15.875 | 26.988 | 13.894 | 11.913 | 6 | 21.5 | 65.5 |
GEZM 010 ES | 15.875 | 26.988 | 23.8 | 11.913 | 9 | 21.6 | 65.5 |
GEG 16 ES | 16 | 28 | 16 | 9 | 4 | 17.6 | 88 |
GE 17 ES | 17 | 30 | 14 | 10 | 10 | 21.2 | 106 |
GE 17 C | 17 | 30 | 14 | 10 | 10 | 22.4 | 56 |
GE 17 TXGR | 17 | 30 | 14 | 10 | 10 | 60 | 100 |
GEH 17 C | 17 | 35 | 20 | 12 | 19 | 31.5 | 78 |
GEZ 012 ES | 19.05 | 31.75 | 16.662 | 14.275 | 6 | 31.5 | 93 |
GEZM 012 ES-2RS | 19.05 | 31.75 | 28.575 | 14.275 | 5 | 31.5 | 93 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GEZM 012 ES | 19.05 | 31.75 | 28.575 | 14.275 | 9 | 31.5 | 93 |
GE 20 ES | 20 | 35 | 16 | 12 | 9 | 30 | 146 |
GE 20 ES-2LS | 20 | 35 | 16 | 12 | 9 | 30 | 146 |
GE 20 ES-2RS | 20 | 35 | 16 | 12 | 9 | 30 | 146 |
GE 20 ESL-2LS | 20 | 35 | 16 | 12 | 9 | 30 | 146 |
GE 20 C | 20 | 35 | 16 | 12 | 9 | 31.5 | 78 |
GE 20 ESX-2LS | 20 | 35 | 16 | 12 | 9 | 44 | 146 |
GE 20 TXE-2LS | 20 | 35 | 16 | 12 | 9 | 83 | 140 |
GE 20 TXG3E-2LS | 20 | 35 | 16 | 12 | 9 | 83 | 140 |
GEG 20 ES | 20 | 35 | 20 | 12 | 4 | 30 | 146 |
GEM 20 ES-2LS | 20 | 35 | 24 | 12 | 6 | 30 | 146 |
GEM 20 ES-2RS | 20 | 35 | 24 | 12 | 6 | 30 | 146 |
GEM 20 ESL-2LS | 20 | 35 | 24 | 12 | 6 | 30 | 146 |
GEM 20 ESX-2LS | 20 | 35 | 24 | 12 | 6 | 44 | 146 |
GEH 20 ES-2LS | 20 | 42 | 25 | 16 | 17 | 48 | 240 |
GEH 20 ES-2RS | 20 | 42 | 25 | 16 | 17 | 48 | 240 |
GEH 20 ESL-2LS | 20 | 42 | 25 | 16 | 17 | 48 | 240 |
GEH 20 C | 20 | 42 | 25 | 16 | 17 | 51 | 127 |
GEH 20 ESX-2LS | 20 | 42 | 25 | 16 | 17 | 72 | 240 |
GEH 20 TXE-2LS | 20 | 42 | 25 | 16 | 17 | 137 | 228 |
GEH 20 TXG3E-2LS | 20 | 42 | 25 | 16 | 17 | 137 | 228 |
GEZ 014 ES | 22.225 | 36.513 | 19.431 | 16.662 | 6 | 42.5 | 127 |
GEZM 014 ES | 22.225 | 36.513 | 33.325 | 16.662 | 9 | 42.5 | 127 |
GE 25 ES | 25 | 42 | 20 | 16 | 7 | 48 | 240 |
GE 25 ES-2LS | 25 | 42 | 20 | 16 | 7 | 48 | 240 |
GE 25 ES-2RS | 25 | 42 | 20 | 16 | 7 | 48 | 240 |
GE 25 ESL-2LS | 25 | 42 | 20 | 16 | 7 | 48 | 240 |
GE 25 C | 25 | 42 | 20 | 16 | 7 | 51 | 127 |
GE 25 ESX-2LS | 25 | 42 | 20 | 16 | 7 | 72 | 240 |
GE 25 TXE-2LS | 25 | 42 | 20 | 16 | 7 | 137 | 228 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GE 25 TXG3E-2LS | 25 | 42 | 20 | 16 | 7 | 137 | 228 |
GEG 25 ES | 25 | 42 | 25 | 16 | 4 | 48 | 240 |
GEM 25 ES-2LS | 25 | 42 | 29 | 16 | 4 | 48 | 240 |
GEM 25 ES-2RS | 25 | 42 | 29 | 16 | 4 | 48 | 240 |
GEM 25 ESL-2LS | 25 | 42 | 29 | 16 | 4 | 48 | 240 |
GEM 25 ESX-2LS | 25 | 42 | 29 | 16 | 4 | 72 | 240 |
GEH 25 ES-2LS | 25 | 47 | 28 | 18 | 17 | 62 | 310 |
GEH 25 ES-2RS | 25 | 47 | 28 | 18 | 17 | 62 | 310 |
GEH 25 ESL-2LS | 25 | 47 | 28 | 18 | 17 | 62 | 310 |
GEH 25 C | 25 | 47 | 28 | 18 | 17 | 65.5 | 166 |
GEH 25 ESX-2LS | 25 | 47 | 28 | 18 | 17 | 93 | 310 |
GEH 25 TXE-2LS | 25 | 47 | 28 | 18 | 17 | 176 | 290 |
GEH 25 TXG3E-2LS | 25 | 47 | 28 | 18 | 17 | 176 | 290 |
GEZ 100 ES | 25.4 | 41.275 | 22.225 | 19.05 | 6 | 56 | 166 |
GEZ 100 ES-2LS | 25.4 | 41.275 | 22.225 | 19.05 | 6 | 56 | 166 |
GEZ 100 ES-2RS | 25.4 | 41.275 | 22.225 | 19.05 | 6 | 56 | 166 |
GEZ 100 ESL-2LS | 25.4 | 41.275 | 22.225 | 19.05 | 6 | 56 | 166 |
GEZ 100 ESX-2LS | 25.4 | 41.275 | 22.225 | 19.05 | 6 | 83 | 166 |
GEZ 100 TXE-2LS | 25.4 | 41.275 | 22.225 | 19.05 | 6 | 83 | 166 |
GEZM 100 ES-2LS | 25.4 | 41.275 | 38.1 | 19.05 | 5 | 56 | 166 |
GEZM 100 ES-2RS | 25.4 | 41.275 | 38.1 | 19.05 | 5 | 56 | 166 |
GEZM 100 ESX-2LS | 25.4 | 41.275 | 38.1 | 19.05 | 5 | 83 | 166 |
GEZM 100 ES | 25.4 | 41.275 | 38.1 | 19.05 | 9 | 56 | 166 |
GE 30 ES | 30 | 47 | 22 | 18 | 6 | 62 | 310 |
GE 30 ES-2LS | 30 | 47 | 22 | 18 | 6 | 62 | 310 |
GE 30 ES-2RS | 30 | 47 | 22 | 18 | 6 | 62 | 310 |
GE 30 ESL-2LS | 30 | 47 | 22 | 18 | 6 | 62 | 310 |
GE 30 C | 30 | 47 | 22 | 18 | 6 | 65.5 | 166 |
GE 30 ESX-2LS | 30 | 47 | 22 | 18 | 6 | 93 | 310 |
GE 30 TXE-2LS | 30 | 47 | 22 | 18 | 6 | 176 | 290 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GE 30 TXG3E-2LS | 30 | 47 | 22 | 18 | 6 | 176 | 290 |
GEM 30 ES-2LS | 30 | 47 | 30 | 18 | 4 | 62 | 310 |
GEM 30 ES-2RS | 30 | 47 | 30 | 18 | 4 | 62 | 310 |
GEM 30 ESL-2LS | 30 | 47 | 30 | 18 | 4 | 62 | 310 |
GEM 30 ESX-2LS | 30 | 47 | 30 | 18 | 4 | 93 | 310 |
GEH 30 ES-2LS | 30 | 55 | 32 | 20 | 17 | 80 | 400 |
GEH 30 ES-2RS | 30 | 55 | 32 | 20 | 17 | 80 | 400 |
GEH 30 ESL-2LS | 30 | 55 | 32 | 20 | 17 | 80 | 400 |
GEH 30 ESX-2LS | 30 | 55 | 32 | 20 | 17 | 120 | 400 |
GEH 30 TXE-2LS | 30 | 55 | 32 | 20 | 17 | 224 | 375 |
GEH 30 TXG3E-2LS | 30 | 55 | 32 | 20 | 17 | 224 | 375 |
GEZ 104 ES | 31.75 | 50.8 | 27.762 | 23.8 | 6 | 86.5 | 260 |
GEZ 104 ES-2LS | 31.75 | 50.8 | 27.762 | 23.8 | 6 | 86.5 | 260 |
GEZ 104 ES-2RS | 31.75 | 50.8 | 27.762 | 23.8 | 6 | 86.5 | 260 |
GEZ 104 ESL-2LS | 31.75 | 50.8 | 27.762 | 23.8 | 6 | 86.5 | 260 |
GEZ 104 ESX-2LS | 31.75 | 50.8 | 27.762 | 23.8 | 6 | 129 | 260 |
GEZ 104 TXE-2LS | 31.75 | 50.8 | 27.762 | 23.8 | 6 | 129 | 260 |
GEZM 104 ES-2LS | 31.75 | 50.8 | 47.625 | 23.8 | 5 | 86.5 | 260 |
GEZM 104 ES-2RS | 31.75 | 50.8 | 47.625 | 23.8 | 5 | 86.5 | 260 |
GEZM 104 ESX-2LS | 31.75 | 50.8 | 47.625 | 23.8 | 5 | 129 | 260 |
GEZM 104 ES | 31.75 | 50.8 | 47.625 | 23.8 | 9 | 86.5 | 260 |
GEZH 104 ES | 31.75 | 61.913 | 35.306 | 28.575 | 8 | 125 | 375 |
GEZH 104 ES-2LS | 31.75 | 61.913 | 35.306 | 28.575 | 8 | 125 | 375 |
GEZH 104 ES-2RS | 31.75 | 61.913 | 35.306 | 28.575 | 8 | 125 | 375 |
GEZH 104 ESX-2LS | 31.75 | 61.913 | 35.306 | 28.575 | 8 | 186 | 375 |
GEG 32 ES | 32 | 52 | 32 | 18 | 4 | 65.5 | 325 |
GEZ 106 ES | 34.925 | 55.563 | 30.15 | 26.187 | 5 | 104 | 310 |
GEZ 106 ES-2LS | 34.925 | 55.563 | 30.15 | 26.187 | 5 | 104 | 310 |
GEZ 106 ES-2RS | 34.925 | 55.563 | 30.15 | 26.187 | 5 | 104 | 310 |
GEZ 106 ESL-2LS | 34.925 | 55.563 | 30.15 | 26.187 | 5 | 104 | 310 |
Designation | Principal dimensions | Angle of tilt | Basic load ratings | ||||
EASIER Bearing | dynamic | static | |||||
d[mm] | D[mm] | B[mm] | C[mm] | α[°] | C[kN] | C0[kN] | |
GEZ 106 ESX-2LS | 34.925 | 55.563 | 30.15 | 26.187 | 5 | 156 | 310 |
GEZ 106 TXE-2LS | 34.925 | 55.563 | 30.15 | 26.187 | 5 | 156 | 310 |
GEZM 106 ES-2LS | 34.925 | 55.563 | 52.375 | 26.187 | 5 | 104 | 310 |
GEZM 106 ES-2RS | 34.925 | 55.563 | 52.375 | 26.187 | 5 | 104 | 310 |
GEZM 106 ESX-2LS | 34.925 | 55.563 | 52.375 | 26.187 | 5 | 156 | 310 |
GEZM 106 ES | 34.925 | 55.563 | 52.375 | 26.187 | 9 | 104 | 310 |
GE 35 CJ2 | 35 | 55 | 25 | 20 | 6 | 80 | 200 |
GE 35 ES | 35 | 55 | 25 | 20 | 6 | 80 | 400 |
GE 35 ES-2LS | 35 | 55 | 25 | 20 | 6 | 80 | 400 |
GE 35 ES-2RS | 35 | 55 | 25 | 20 | 6 | 80 | 400 |
GE 35 ESL-2LS | 35 | 55 | 25 | 20 | 6 | 80 | 400 |
GE 35 ESX-2LS | 35 | 55 | 25 | 20 | 6 | 120 | 400 |
GE 35 TXE-2LS | 35 | 55 | 25 | 20 | 6 | 224 | 375 |
GE 35 TXG3E-2LS | 35 | 55 | 25 | 20 | 6 | 224 | 375 |
GEM 35 ES-2LS | 35 | 55 | 35 | 20 | 6 | 80 | 400 |
GEM 35 ES-2RS | 35 | 55 | 35 | 20 | 6 | 80 | 400 |
GEM 35 ESL-2LS | 35 | 55 | 35 | 20 | 6 | 80 | 400 |
GEM 35 ESX-2LS | 35 | 55 | 35 | 20 | 6 | 120 | 400 |
GEH 35 ES-2LS | 35 | 62 | 35 |