China HK273416 Needle Roller Bearings

Designation: HK273416 Bearings

Type: Needle Roller Bearings

Dimension: 27x34x16 mm

Weight: 0.03kg

Interchange: INA, IKO, NSK, KOYO

Materials: Chrome Steel 

Drawn Cup Needle Roller Bearings have a deep drawn, thin-walled outer ring. Drawn cup needle roller bearings are typically used in applications where the housing bore cannot be used as a raceway for a needle roller and cage assembly, but where a very compact and economical bearing arrangement is required. These bearings are mounted with a tight interference fit in the housing. That enables a simple and economic design of the housing bore, as shoulders or snap rings are not required to locate the bearing axially.

The drawn cup of hardened steel and the needle roller and cage assembly of these bearings form a non-separable unit.

TKW supplies a wide assortment of drawn cup needle roller bearings. This includes:

-- Bearings with open ends 

-- Bearings with a closed end 

-- Full complement bearings with open ends

TKW drawn cup needle roller bearings:

-- are  supplied without an inner ring

-- are generally designed with one needle roller and cage assembly -- except wide sizes, which incorporate two needle roller and cage assemblies immediately adjacent to each other, with a lubrication hole in the outer ring

· Drawn cup needle roller bearings with open ends

o are available open (without seals) or sealed on one or both sides

· Drawn cup needle roller bearings with a closed end

o are available open or sealed

o are suitable for bearing arrangements where they are situated at the end of a shaft

o accommodate small axial guidance forces, because of the profiled design of their closed end

· Full complement bearings with open ends

o are suitable for very heavy radial loads at moderate speeds

o are available with open ends and without seals only

Full complement drawn cup needle roller bearings are supplied with a special grease to secure the rollers during transport. However, TKW recommends relubricating after mounting.