Availability: | |
---|---|
Part Number | RA19013 Bearing |
Bearing Type | Crossed Roller Bearings |
Interchange | CRBS19013 Bearings |
Construction | Single Row,Combined Radial; Thrust; and Moment |
Seal Type | Open, Seal and full complement design available |
ABEC Rating | ABEC-5, ABEC-7, ABEC-9 |
Ring Material | Steel |
Roller Material | Steel |
Shaft dia. mm | 190 |
Mass(kg) | 0.69 |
Bore Dia (d) | 190mm |
Outer Dia (D) | 216mm |
Width (B) | 13mm |
● High Rotation Accuracy of RA19013 Cross Roller Bearing/ CRBS 19013 Bearings
● Significantly Increased Rigidity (Three to Four times Greater)
Unlike the thin angular ball bearings installed in double rows, the cross array of rollers allows a single Cross-Roller Ring unit to receive loads in all directions, increasing the rigidity to three to four times greater than the conventional type.
Major dimensions | Shoulder dimensions | Basic load rating | Mass | ||||||||||
Shaft diameter | (radial) | ||||||||||||
TKW | Model No. | Inner diameter | Outer diameter | Roller pitch circle diameter | |||||||||
d | D | dp | Width | Greasing hole | C | C0 | |||||||
B B1 | a | b | rmin | ds | Dh | kN | kN | kg | |||||
50 | RA 5008 | 50 | 66 | 57 | 8 | 2 | 0.8 | 0.5 | 53.5 | 60.5 | 5.1 | 7.19 | 0.08 |
60 | RA 6008 | 60 | 76 | 67 | 8 | 2 | 0.8 | 0.5 | 63.5 | 70.5 | 5.68 | 8.68 | 0.09 |
70 | RA 7008 | 70 | 86 | 77 | 8 | 2 | 0.8 | 0.5 | 73.5 | 80.5 | 5.98 | 9.8 | 0.1 |
80 | RA 8008 | 80 | 96 | 87 | 8 | 2 | 0.8 | 0.5 | 83.5 | 90.5 | 6.37 | 11.3 | 0.11 |
90 | RA 9008 | 90 | 106 | 97 | 8 | 2 | 0.8 | 0.5 | 93.5 | 100.5 | 6.76 | 12.4 | 0.12 |
100 | RA 10008 | 100 | 116 | 107 | 8 | 2 | 0.8 | 0.5 | 103.5 | 110.5 | 7.15 | 13.9 | 0.14 |
110 | RA 11008 | 110 | 126 | 117 | 8 | 2 | 0.8 | 0.5 | 113.5 | 120.5 | 7.45 | 15 | 0.15 |
120 | RA 12008 | 120 | 136 | 127 | 8 | 2 | 0.8 | 0.5 | 123.5 | 130.5 | 7.84 | 16.5 | 0.17 |
130 | RA 13008 | 130 | 146 | 137 | 8 | 2 | 0.8 | 0.5 | 133.5 | 140.5 | 7.94 | 17.6 | 0.18 |
140 | RA 14008 | 140 | 156 | 147 | 8 | 2 | 0.8 | 0.5 | 143.5 | 150.5 | 8.33 | 19.1 | 0.19 |
150 | RA 15008 | 150 | 166 | 157 | 8 | 2 | 0.8 | 0.5 | 153.5 | 160.5 | 8.82 | 20.6 | 0.2 |
160 | RA 16013 | 160 | 186 | 172 | 13 | 2.5 | 1.6 | 0.8 | 165 | 179 | 23.3 | 44.9 | 0.59 |
170 | RA 17013 | 170 | 196 | 182 | 13 | 2.5 | 1.6 | 0.8 | 175 | 189 | 23.5 | 46.5 | 0.64 |
180 | RA 18013 | 180 | 206 | 192 | 13 | 2.5 | 1.6 | 0.8 | 185 | 199 | 24.5 | 49.8 | 0.68 |
190 | RA 19013 | 190 | 216 | 202 | 13 | 2.5 | 1.6 | 0.8 | 195 | 209 | 24.9 | 51.5 | 0.69 |
200 | RA 20013 | 200 | 226 | 212 | 13 | 2.5 | 1.6 | 0.8 | 205 | 219 | 25.8 | 54.7 | 0.71 |
When you purchase the crossed roller bearings, please confirm the designation first.
1. Model RU (Integrated Inner/Outer Ring Type)
2. Model RB (Separable Outer Ring Type for Inner Ring Rotation)
3. Model RE (Separable Inner Ring Type for Outer Ring Rotation)
4. USP-Grade Series of Models RB/RE
5. Model RA (Separable Outer Ring Type for Inner Ring Rotation)
6. Model RA-C (Single-Split Type)
Products Features
1.Same standard with IKO,THK,INA,KAYDON,HIWIN,PMI
2.High rigidity
3.Accept loads from all directions at the same time
4.Smooth rotation
5.Compact, space saving
6.Easy installation and adjustment
7.Varuous bearing types and sizes to accommodate your requirements.
8.Customized designs available
E-mail: sales@xrbearing.com, brandbearings@gmail.com
Skype:brandbearings
Whatsapp: 0086-13280450757
www.electricallyinsulatedbearings.com
Part Number | RA19013 Bearing |
Bearing Type | Crossed Roller Bearings |
Interchange | CRBS19013 Bearings |
Construction | Single Row,Combined Radial; Thrust; and Moment |
Seal Type | Open, Seal and full complement design available |
ABEC Rating | ABEC-5, ABEC-7, ABEC-9 |
Ring Material | Steel |
Roller Material | Steel |
Shaft dia. mm | 190 |
Mass(kg) | 0.69 |
Bore Dia (d) | 190mm |
Outer Dia (D) | 216mm |
Width (B) | 13mm |
● High Rotation Accuracy of RA19013 Cross Roller Bearing/ CRBS 19013 Bearings
● Significantly Increased Rigidity (Three to Four times Greater)
Unlike the thin angular ball bearings installed in double rows, the cross array of rollers allows a single Cross-Roller Ring unit to receive loads in all directions, increasing the rigidity to three to four times greater than the conventional type.
Major dimensions | Shoulder dimensions | Basic load rating | Mass | ||||||||||
Shaft diameter | (radial) | ||||||||||||
TKW | Model No. | Inner diameter | Outer diameter | Roller pitch circle diameter | |||||||||
d | D | dp | Width | Greasing hole | C | C0 | |||||||
B B1 | a | b | rmin | ds | Dh | kN | kN | kg | |||||
50 | RA 5008 | 50 | 66 | 57 | 8 | 2 | 0.8 | 0.5 | 53.5 | 60.5 | 5.1 | 7.19 | 0.08 |
60 | RA 6008 | 60 | 76 | 67 | 8 | 2 | 0.8 | 0.5 | 63.5 | 70.5 | 5.68 | 8.68 | 0.09 |
70 | RA 7008 | 70 | 86 | 77 | 8 | 2 | 0.8 | 0.5 | 73.5 | 80.5 | 5.98 | 9.8 | 0.1 |
80 | RA 8008 | 80 | 96 | 87 | 8 | 2 | 0.8 | 0.5 | 83.5 | 90.5 | 6.37 | 11.3 | 0.11 |
90 | RA 9008 | 90 | 106 | 97 | 8 | 2 | 0.8 | 0.5 | 93.5 | 100.5 | 6.76 | 12.4 | 0.12 |
100 | RA 10008 | 100 | 116 | 107 | 8 | 2 | 0.8 | 0.5 | 103.5 | 110.5 | 7.15 | 13.9 | 0.14 |
110 | RA 11008 | 110 | 126 | 117 | 8 | 2 | 0.8 | 0.5 | 113.5 | 120.5 | 7.45 | 15 | 0.15 |
120 | RA 12008 | 120 | 136 | 127 | 8 | 2 | 0.8 | 0.5 | 123.5 | 130.5 | 7.84 | 16.5 | 0.17 |
130 | RA 13008 | 130 | 146 | 137 | 8 | 2 | 0.8 | 0.5 | 133.5 | 140.5 | 7.94 | 17.6 | 0.18 |
140 | RA 14008 | 140 | 156 | 147 | 8 | 2 | 0.8 | 0.5 | 143.5 | 150.5 | 8.33 | 19.1 | 0.19 |
150 | RA 15008 | 150 | 166 | 157 | 8 | 2 | 0.8 | 0.5 | 153.5 | 160.5 | 8.82 | 20.6 | 0.2 |
160 | RA 16013 | 160 | 186 | 172 | 13 | 2.5 | 1.6 | 0.8 | 165 | 179 | 23.3 | 44.9 | 0.59 |
170 | RA 17013 | 170 | 196 | 182 | 13 | 2.5 | 1.6 | 0.8 | 175 | 189 | 23.5 | 46.5 | 0.64 |
180 | RA 18013 | 180 | 206 | 192 | 13 | 2.5 | 1.6 | 0.8 | 185 | 199 | 24.5 | 49.8 | 0.68 |
190 | RA 19013 | 190 | 216 | 202 | 13 | 2.5 | 1.6 | 0.8 | 195 | 209 | 24.9 | 51.5 | 0.69 |
200 | RA 20013 | 200 | 226 | 212 | 13 | 2.5 | 1.6 | 0.8 | 205 | 219 | 25.8 | 54.7 | 0.71 |
When you purchase the crossed roller bearings, please confirm the designation first.
1. Model RU (Integrated Inner/Outer Ring Type)
2. Model RB (Separable Outer Ring Type for Inner Ring Rotation)
3. Model RE (Separable Inner Ring Type for Outer Ring Rotation)
4. USP-Grade Series of Models RB/RE
5. Model RA (Separable Outer Ring Type for Inner Ring Rotation)
6. Model RA-C (Single-Split Type)
Products Features
1.Same standard with IKO,THK,INA,KAYDON,HIWIN,PMI
2.High rigidity
3.Accept loads from all directions at the same time
4.Smooth rotation
5.Compact, space saving
6.Easy installation and adjustment
7.Varuous bearing types and sizes to accommodate your requirements.
8.Customized designs available
E-mail: sales@xrbearing.com, brandbearings@gmail.com
Skype:brandbearings
Whatsapp: 0086-13280450757
www.electricallyinsulatedbearings.com