China SY1/2TF bearing

SY1/2TF bearing plummer block units with a cast housing and grub screws, with a standard inner ring, is an insert single deep groove ball bearings with a convex sphered outside diameter and working together with a housing, SY1/2TF plummer block unit consist of SY503U Housing and YAR203-008-2F Bearing, SY1/2TF bearing plummer block unit can accommodate moderate initial misalignment, SY1/2TF bearings is widely used in many industrial application, the inner diameter is 12.7mm, the outer ring is 56mm, the height is 27.4mm, the weight of SY1/2TF bearings is 1.21kg, SY1/2TF bearings with a standard inner ring are designed in according with a moduar concept, each SY1/2TF bearing can be fitted with pillow block housing of various diameter and width series if they have correct outside diameter for the housing. XRB as one of the biggest China bearing manufacturer can supply the best solution for our Y-housing customers according to their specific applications.

Ball Bearing Units efficiently prevent grease from leaking out of the interior of the bearing, and perform extremely well at keeping contaminates, such as dust and water, from entering. This is achieved by installing the seal to the outer ring of the bearing and installing the slinger to the inner ring of the bearing.

Ball Bearing Units are tapped to accept a grease fitting which is also supplied with every mounted unit. Bearings are pre-lubricated at the factory and do not require additional grease upon installation. When operating in excessively moist, dusty, or hot environments, it is

recommended that grease be supplied at regular intervals. If appropriately maintained, the rated life of the bearing can be extended.

EASIER Lithium Bearing Grease to be sealed in early bearing grease use are manufactured to accommodate a widerange of operating conditions.