+86-635-8509787                        +86-13280450757                            sales@xrbearing.com   

NEWS

You are here: Home » News » SED Split Plummer block housings for spherical roller bearings on an adapter sleeve

SED Split Plummer block housings for spherical roller bearings on an adapter sleeve

Views:0     Author:Site Editor     Publish Time: 2017-02-18      Origin:Site

 
SED split plummer block housings for spherical roller bearings is one kind of Plummer block housings,it made of Cast iron, SED 30,SED31,SED32 and SED39 Series split plummer block housings are painted black using water based alkyd paint,the paint is not affected by most lubrication or engine oils,cutting fluids or alkalescent washing chemicals,unpainted surfaces are protected by a solventless rust inhibitor.variants of SED split plummer block housings,including housing painted to other colours,housing with a narrower base and differently attachment bolt holes,this housing for bearings on cylindrical seat on stepped shafts and housings modified for circulating oil lubrication.
 
The tapped hole used for grease relubrication can be used as the oil inlet.this housing are supplied standard with a multi-seal on each side,which consists of an integrated labyrinth seal and a three stage labyrinth,the radial shaft seal is installed in the radial seal cover,which is then mounted onto the labyrinth seal cover.
 
SED Split plummer block housings are supplied with a cover for either shaft ends or through shafts
1.Housings with a cover for shaft ends have the designation suffix A
2.Housings with a cover for through shafts have the designation suffix B
 
SED Split plummer block housings can be used for both the locating and non-locating bearing positions and are supplied two designs, housing with suffix F have a bearing seat that matchs the bearing width,these housings should be used for spherical roller bearing in the locating position and CARB toroidal roller bearings in the non-locating position. housing with suffix L have a bearing seat that is wider than the bearing,these housings should be used for spherical roller bearings in the non-locating position,this housing paint is heat resistand up to 80 degree material temperature or 100 degree ambient temperature,the housing material does not have any addional temperature limits except for very low temperature applications where impact strength could be a factor.
 
Designation of SED Split plummer block housings
 
SED3292
SED3296
SED31/500
SED32/500
SED31/530
SED32/530
SED30/560
SED31/560
SED32/560
SED39/600
SED30/600
SED31/600
SED32/600
SED39/630
SED30/630
SED31/630
SED39/670
SED30/670
SED31/670
SED32/670
SED39/710
SED30/710
SED31/710
SED32/710
SED39/750
SED30/750
SED31/750
SED32/750
SED39/800
SED30/800
SED31/800
SED39/850
SED30/850
SED31/850
SED39/900
SED30/900
SED39/950
SED30/950
 
XRB as the biggest SED split plummer block housings supplier and China bearing manufacturer, it can supply the best solution of split plummer block housings according to their specific applications,its large quantity stock can meet your demand with lowest price and fast delivery. small order and big order are all available with fast  delivery and saft package,we can ship SED split plummer block housings to your office at the first time,more technical details,please contact with 
 
E-mail:brandbearings@gmail.com
Skype:brandbearings
www.xrbearing.com

XRB Focuses On the Development and Manufacturing of General and Non-Standard Rolling bearings
 

Quick Links

Contact Us

 Yandian Industrial zone, Linqing City, Liaocheng,Shandong Province, China,
 +86-635-8509787 / +86-13280450757
 +86-13280450757  
 +86-13280450757
Copyright © 2020 Liaocheng XRB Bearing manufacturing Co.,Ltd  Technical support :  leadong