+86-635-8509787                        +86-13280450757                            sales@xrbearing.com   

NEWS

You are here: Home » News » FAG Split Plummer block housing SNV series

FAG Split Plummer block housing SNV series

Views:0     Author:Site Editor     Publish Time: 2017-02-07      Origin:Site

FAG as the famous bearing manufacturer in the world,it not only produce rolling bearings,but also the split plummer block housings,SNV series split plummer block housings is one kinds of FAG housing,today we talk about FAG split plummer block housings SNV series. the dimension of the FAG housings of series SNV are interchangeable with NSK Split plummer block housings,SNV housing are made of cast iron,their loadability is considerably higher than that of the SN housings.
this time we introduce some points of this housings like Bearing seat,bearing mounting,seals,covers,lubrication.
 
FAG split plummer block housings usually cooperate with self-aligning ball bearings,spherical roller bearings,split spherical roller bearings,sealed spherical roller bearings,cylindrical roller bearings,CARB toroidal roller bearings and deep groove ball bearings,the mainly advantage of FAG split plummer block housing SNV Series :
 
--Easier stock-keeping due to the modular design,one housing is suitable for different shaft diameters.
--High loadability.
--Depending on operating conditions two-lips seals,labyrinth seals,felt seals,V-ring seals or combined seals can be used special 
are also available upon request.
--Centered locating bearing by means of two locating rings of idential width.
--Plane faces at housing base allow the housing to be secured with stops if high forces do not act vertically on the housing 
support surface.
--Holes can be drilled at spots marked on the housing for lubricating and monitoring system,fastening bolts,straight or tapered pins.
--Universal coating of all outer surfaces of the housing which are not machined,the paint can be coated with all synthetic resin,
polyurethane,acrylic,epoxy resin,chlorine rubber,cellulose and acid-hardening hammer dimple enamels.
 
The bearings are either directly seated on the shaft or fixed with adapter sleeves,seals and covers fit into the annular grooves,with rectangular profile,on both sides of the FAG Split plummer block housing SNV Series,DH two-lip seals is usually used,as well as DHV V-ring seals,TSV Labyrinth seals,FSV Felt seals,TCV combined seals and special seals,good oil lubrications or grease lubrications can make long service for FAG SNV Split plummer block housings,
 
XRB as the biggest FAG SNV split plummer block housings supplier and China bearing manufacturer,it can supply the best solution for FAG SNV Split plummer block housing and the bearings according to their specific applications.,it can supply Original FAG SNV split plummer block housings,Our large quantity FAG SNV split plummer block housings Stock can meet your need with lowest price and fast delivery.
 
We accepted DHL,FEDEX,TNT express for small order and samples order.we will we can ship our FAG SNV split plummer block housings to your office at the first time.More technical details,please contact with :
 
www.xrbearing.com
Skype:brandbearings
E-mail:brandbearings@gmail.com

XRB Focuses On the Development and Manufacturing of General and Non-Standard Rolling bearings
 

Quick Links

Contact Us

 Yandian Industrial zone, Linqing City, Liaocheng,Shandong Province, China,
 +86-635-8509787 / +86-13280450757
 +86-13280450757  
 +86-13280450757
Copyright © 2020 Liaocheng XRB Bearing manufacturing Co.,Ltd  Technical support :  leadong