FAG Split plummer block housing S30 series are one kind of plummer block housings,and it made of cast iron,This housing working with spherical roller bearings 230 series with tapered bore and adapter sleeve.locating bearing,non-locating bearing as well as cover DK,the smaller split plummer block housings including S3040 are non-locating bearing housings,i.e. locating bearing arrangements can be achieved by inserting a locating ring, locating rings must be ordered separately, housings closed on one side to size S3040 have a polyamide cover inserted in the slot instead of the felt strip, this cover must be ordered separately.
The larger split plummer block housing from S3044 are produced as non-locating bearing housings or as locating bearing housings, when ordering housings closed on one side,design A must be indicated in the order, the cover is made from steel, housings of design B are intended for continuous shafts. the housings are sealed using felt strips,felt seals allow shaft misalignment of up to 0.5 degree directions, housings of series S30 can be relubricated connector in the centre of the housing,the housing material is flake graphite cast iron. the grease quantity for initial filling of housing S30 we recommended 60% filled of the housing.
FAG Split plummer block housing S30 series and unsplit plummer block housings are generally intended for bearing arrangements with self-aligning ball bearings,single row spherical roller bearing and sealed spherical roller bearings. in split plummer block housing,the removable upper section of the housing is centred on the lower section by dowel pins,allowing easier fitting and maintenance , the upper sections must not be interchanged with each other. in the
case of split housings,the tolerance data for bearing seats are only valid for the delivered condition, before the screws connecting the upper and lower sections are loosened.
Designation of FAG Split plummer block housing S30 series
S3024 housing
S3026 housing
S3028 housing
S3030 housing
S3032 housing
S3034 housing
S3036 housing
S3038 housing
S3040 housing
S3044 housing
S3048 housing
S3052 housing
S3056 housing
S3060 housing
S3064 housing
S3068 housing
S3072 housing
S3076 housing
S3080 housing
S3084 housing
S3088 housing
S3092 housing
S3096 housing
XRB as the biggest FAG Split plummer block housings S30 series supplier and
China bearing manufacturer, it can supply the best solution for FAG Split plummer block housings S30 series and the bearings according to their specific applications,it can supply Original SNL3134 bearing housing,Our large quantity FAG Split plummer block housings S30 series Stock can meet your need with lowest price and fast delivery.
We accepted DHL,FEDEX,TNT express for small order and samples order,also the transportation By AIR or By Sea,by Train are all avaiable.we are sure we can ship our FAG Split plummer block housings S30 series to your office at the first time.More technical details,please contact with :
E-mail: brandbearings@gmail.com,
Skype:brandbearings
www.xrbearing.com
