Split plummer block housings is usually working together with spherical roller bearings,sealed spherical roller bearings,Carb toroidal roller bearings and self-aligning ball bearings,the housing can accommodate bearing in the 02, 03, 22,23, 30, 31, 32, 39, 40 and 41 ISO Dimension Series. They can often be fitted with a variety of seals. Several designs and variants of split plummer block housings are available making the use of tailored housings unnecessary and thus enabling cost-effective bearing arrangements to be made.
The main benefit of split plummer block housing is their easy installation,pre-assembly shafts can be mounted in them,SNL plummer block housings in the 30,31 and 32 series are also refered to as the Large SNL Plummer block housings,these plummer block housing enable the bearings to achive maximum bearing service life with less need for maintenance,so it can reduce the cost of maintenance,another benefit is the choice of oil or grease lubrication for the bearing housed in SNL plummer blocks,a range of seals for oil lubrication and difficult environments provide trouble-free operation.
The split plummer block housings are made of grey cast,the application of split plummer block housings as follows:
* Material handling
* Handling systems
* Mining and construction
* Fluid machinery
* Metallurgical
* Pulp and paper
these application need the part must be:
* Long service life
* Robust design
* Long relubrication intervals
* Ready for relubrication
* Condition monitoring facilities
* Avoid risk of mixed caps
* Fast and easy mounting and dismounting
Split plummer block housings must be have high load carrying ability,and XRB (China bearing manufacturer)Usually use
some suffix to indicate the designation :
– Housing of grey cast iron
D Housing of spheroidal graphite cast iron
Suffixes
– Housing for a bearing on an adapter sleeve and a straight shaft
G Housing for a bearing with a cylindrical bore and for a stepped shaft
L Housing for a non-locating bearing arrangement
F Housing for a locating bearing arrangement
TURT Housing prepared for oil lubrication (spherical roller bearing) with seals
TURA Housing prepared for oil lubrication (CARB toroidal roller bearing) with seals
TURP Housing with a special seal for large axial movement and circulating oil lubrication
V Housing with grease escape holes in the base
T A drilled and tapped hole 1/8-27 NPSF at one side of the cap (opposite to the lock nut) to take a grease fitting AH 1/8-27 PTF
TD A drilled and tapped hole 1/8-27 NPSF on both sides of the cap to take a grease fitting AH 1/8-27 PTF
for relubrication of the seals; two fittings supplied with the housing
SN Housing with a drilled and tapped hole for a sensor
XRB (China bearing manufacturer) can supply complete split plummer block housing,we adopt the advanced equipment and technical precess to make sure the quality no different with FAG,NSK,NTN,TIMKEN plummer block housing.please contact with us for discuss more technical demand. 
