Availability: | |
---|---|
3012-2RS Bearing
Type: Double Row Angular Contact Ball Bearings
Dimension: 60x95x26mm
Weight: 0.5kg
Materials: Chrome Steel
Grade: ABEC-1, ABEC-3, ABEC-5
Brand: EASIER/TKW
The design of double row angular contact ball bearings is basically the same as that of single row angular contact ball bearings, but only takes up a smaller axial space. The double row angular contact ball bearing can bear radial load and axial load acting in two directions, it can limit the axial displacement of the shaft or housing in both directions, and the contact angle is 30 degrees. A bearing configuration with higher rigidity can be provided, and it can withstand the overturning moment.
TKW can produce Many different size and design of Double Row Ball Bearings
Designation | Designation | Designation |
3000A-2RS | 3800A-2RS | 3900A-2RS |
3001A-2RS | 3801A-2RS | 3901A-2RS |
3002A-2RS | 3802A-2RS | 3902A-2RS |
3003A-2RS | 3803A-2RS | 3903A-2RS |
3004A-2RS | 3804A-2RS | 3904A-2RS |
3005A-2RS | 3805A-2RS | 3905A-2RS |
3006A-2RS | 3806A-2RS | 3906A-2RS |
3007A-2RS | 3807A-2RS | 3907A-2RS |
3008A-2RS | 3808A-2RS | 3908A-2RS |
3009A-2RS | 3809A-2RS | 3909A-2RS |
3010A-2RS | 3810A-2RS | 3910A-2RS |
3011A-2RS | 3811A-2RS | 3911A-2RS |
3012A-2RS | 3812A-2RS | 3912A-2RS |
3013A-2RS | 3813A-2RS | 3913A-2RS |
3014A-2RS | 3814A-2RS | 3914A-2RS |
3015A-2RS | 3815A-2RS | 3915A-2RS |
3016A-2RS | 3816A-2RS | 3916A-2RS |
3017A-2RS | 3817A-2RS | 3917A-2RS |
3018A-2RS | 3818A-2RS | 3918A-2RS |
3019A-2RS | 3819A-2RS | 3919A-2RS |
3020A-2RS | 3820A-2RS | 3920A-2RS |
EASIER/TKW Can supply complete Double Row Angular Contact Ball Bearings
Double row angular contact ball bearings can withstand larger radial loads, mainly combined radial and axial loads and moment loads, limiting the axial displacement of the shaft on both sides. Mainly used in components that limit the bidirectional axial displacement of the shaft and the housing.
(1) The standard design of type A bearing whose outer diameter is less than or equal to 90mm. There is no notch for ball loading, so it can bear equal bidirectional axial load. The light-weight glass fiber reinforced nylon 66 cage is adopted, and the temperature rise of the bearing is small.
(2) The standard design of type B bearings with an outer diameter greater than 90mm. There is a ball-loading gap on one side, and it is equipped with a steel stamping cage or a brass solid cage.
(3) Type C is a reinforced structure, with a ball notch on one side, which can hold more steel balls, so the load-bearing capacity is higher.
(4) The double row angular contact ball bearings with dust cover on both sides and seal ring on both sides A and C design can be equipped with dust cover (non-contact) or sealing ring (contact type) on both sides. ). The inside of the sealed bearing is filled with anti-rust lithium grease, and the operating temperature is generally -30~+110℃. No relubrication is required during use, and it should not be heated or cleaned before installation.
Compared with single-row angular contact ball bearings, the production of double-row angular contact ball bearings has the same processing technology, but it is more difficult to process. It is necessary to ensure that the balance of the bearing channel is poor during the processing. A slight deviation will affect the bearing The service life, speed, noise, etc. have a relatively large impact, so double row angular contact ball bearings are the same as double row deep groove ball bearings. Only by grasping the balance of the bearing channel can the quality of the bearing be ensured. In order to ensure the high quality of the products, our company specially updated the turning processing, grinding processing equipment and inspection and testing equipment, and improved the processing of operation...
The tiltability between the inner and outer rings of double row angular contact ball bearings is limited. The allowable tilt angle depends on the bearing's internal clearance, bearing size, internal design, and the force and moment acting on the bearing, and the maximum allowable tilt angle should be guaranteed No excessive additional stress is generated in the bearing.
Industrial Application of Double Row Angular Contact Ball Bearings
• Fluid machinery:
Pumps, compressors, blowers, ventilators, turbines
• Automotive engineering:
Drives, clutches, gearboxes, wheel bearings, components
• Industrial drives and drive motors
• Printing machines
• Textile machines
• Material handling
Whatsapp: +86-13280450757
Wechat: +86-13280450757
E-mail: sales@xrbearing.com
www.electricallyinsulatedbearings.com
3012-2RS Bearing
Type: Double Row Angular Contact Ball Bearings
Dimension: 60x95x26mm
Weight: 0.5kg
Materials: Chrome Steel
Grade: ABEC-1, ABEC-3, ABEC-5
Brand: EASIER/TKW
The design of double row angular contact ball bearings is basically the same as that of single row angular contact ball bearings, but only takes up a smaller axial space. The double row angular contact ball bearing can bear radial load and axial load acting in two directions, it can limit the axial displacement of the shaft or housing in both directions, and the contact angle is 30 degrees. A bearing configuration with higher rigidity can be provided, and it can withstand the overturning moment.
TKW can produce Many different size and design of Double Row Ball Bearings
Designation | Designation | Designation |
3000A-2RS | 3800A-2RS | 3900A-2RS |
3001A-2RS | 3801A-2RS | 3901A-2RS |
3002A-2RS | 3802A-2RS | 3902A-2RS |
3003A-2RS | 3803A-2RS | 3903A-2RS |
3004A-2RS | 3804A-2RS | 3904A-2RS |
3005A-2RS | 3805A-2RS | 3905A-2RS |
3006A-2RS | 3806A-2RS | 3906A-2RS |
3007A-2RS | 3807A-2RS | 3907A-2RS |
3008A-2RS | 3808A-2RS | 3908A-2RS |
3009A-2RS | 3809A-2RS | 3909A-2RS |
3010A-2RS | 3810A-2RS | 3910A-2RS |
3011A-2RS | 3811A-2RS | 3911A-2RS |
3012A-2RS | 3812A-2RS | 3912A-2RS |
3013A-2RS | 3813A-2RS | 3913A-2RS |
3014A-2RS | 3814A-2RS | 3914A-2RS |
3015A-2RS | 3815A-2RS | 3915A-2RS |
3016A-2RS | 3816A-2RS | 3916A-2RS |
3017A-2RS | 3817A-2RS | 3917A-2RS |
3018A-2RS | 3818A-2RS | 3918A-2RS |
3019A-2RS | 3819A-2RS | 3919A-2RS |
3020A-2RS | 3820A-2RS | 3920A-2RS |
EASIER/TKW Can supply complete Double Row Angular Contact Ball Bearings
Double row angular contact ball bearings can withstand larger radial loads, mainly combined radial and axial loads and moment loads, limiting the axial displacement of the shaft on both sides. Mainly used in components that limit the bidirectional axial displacement of the shaft and the housing.
(1) The standard design of type A bearing whose outer diameter is less than or equal to 90mm. There is no notch for ball loading, so it can bear equal bidirectional axial load. The light-weight glass fiber reinforced nylon 66 cage is adopted, and the temperature rise of the bearing is small.
(2) The standard design of type B bearings with an outer diameter greater than 90mm. There is a ball-loading gap on one side, and it is equipped with a steel stamping cage or a brass solid cage.
(3) Type C is a reinforced structure, with a ball notch on one side, which can hold more steel balls, so the load-bearing capacity is higher.
(4) The double row angular contact ball bearings with dust cover on both sides and seal ring on both sides A and C design can be equipped with dust cover (non-contact) or sealing ring (contact type) on both sides. ). The inside of the sealed bearing is filled with anti-rust lithium grease, and the operating temperature is generally -30~+110℃. No relubrication is required during use, and it should not be heated or cleaned before installation.
Compared with single-row angular contact ball bearings, the production of double-row angular contact ball bearings has the same processing technology, but it is more difficult to process. It is necessary to ensure that the balance of the bearing channel is poor during the processing. A slight deviation will affect the bearing The service life, speed, noise, etc. have a relatively large impact, so double row angular contact ball bearings are the same as double row deep groove ball bearings. Only by grasping the balance of the bearing channel can the quality of the bearing be ensured. In order to ensure the high quality of the products, our company specially updated the turning processing, grinding processing equipment and inspection and testing equipment, and improved the processing of operation...
The tiltability between the inner and outer rings of double row angular contact ball bearings is limited. The allowable tilt angle depends on the bearing's internal clearance, bearing size, internal design, and the force and moment acting on the bearing, and the maximum allowable tilt angle should be guaranteed No excessive additional stress is generated in the bearing.
Industrial Application of Double Row Angular Contact Ball Bearings
• Fluid machinery:
Pumps, compressors, blowers, ventilators, turbines
• Automotive engineering:
Drives, clutches, gearboxes, wheel bearings, components
• Industrial drives and drive motors
• Printing machines
• Textile machines
• Material handling
Whatsapp: +86-13280450757
Wechat: +86-13280450757
E-mail: sales@xrbearing.com
www.electricallyinsulatedbearings.com
Double Row Angular Contact Ball Bearings
Designation | Principal dimensions | Basic load ratings | Speed ratings | ||||
EASIER/ TKW | dynamic | static | Reference speed | Limiting speed | |||
d[mm] | D[mm] | B[mm] | C[kN] | C0[kN] | [r/min] | [r/min] | |
3200 A-2RS1TN9/MT33 | 10 | 30 | 14 | 7.61 | 4.3 | 17 000 | |
3200 A-2ZTN9/MT33 | 10 | 30 | 14 | 7.61 | 4.3 | 26 000 | 24 000 |
3200 ATN9 | 10 | 30 | 14 | 7.61 | 4.3 | 26 000 | 24 000 |
3201 A-2RS1TN9/MT33 | 12 | 32 | 15.9 | 10.1 | 5.6 | 15 000 | |
3201 A-2ZTN9/MT33 | 12 | 32 | 15.9 | 10.1 | 5.6 | 24 000 | 22 000 |
3201 ATN9 | 12 | 32 | 15.9 | 10.1 | 5.6 | 24 000 | 22 000 |
3202 A-2RS1TN9/MT33 | 15 | 35 | 15.9 | 11.2 | 6.8 | 14 000 | |
3202 A-2ZTN9/MT33 | 15 | 35 | 15.9 | 11.2 | 6.8 | 22 000 | 18 000 |
3202 ATN9 | 15 | 35 | 15.9 | 11.2 | 6.8 | 22 000 | 18 000 |
3302 A-2RS1 | 15 | 42 | 19 | 15.1 | 9.3 | 12 000 | |
3302 A-2RS1TN9/MT33 | 15 | 42 | 19 | 15.1 | 9.3 | 12 000 | |
3302 A-2Z | 15 | 42 | 19 | 15.1 | 9.3 | 18 000 | 16 000 |
3302 A-2ZTN9/MT33 | 15 | 42 | 19 | 15.1 | 9.3 | 18 000 | 16 000 |
3302 ATN9 | 15 | 42 | 19 | 15.1 | 9.3 | 18 000 | 16 000 |
3203 A-2RS1TN9/MT33 | 17 | 40 | 17.5 | 14.3 | 8.8 | 12 000 | |
3203 A-2ZTN9/MT33 | 17 | 40 | 17.5 | 14.3 | 8.8 | 19 000 | 16 000 |
3203 ATN9 | 17 | 40 | 17.5 | 14.3 | 8.8 | 19 000 | 16 000 |
3303 A-2RS1 | 17 | 47 | 22.2 | 21.6 | 12.7 | 11 000 | |
3303 A-2RS1TN9/MT33 | 17 | 47 | 22.2 | 21.6 | 12.7 | 11 000 | |
3303 A-2Z | 17 | 47 | 22.2 | 21.6 | 12.7 | 17 000 | 14 000 |
3303 A-2ZTN9/MT33 | 17 | 47 | 22.2 | 21.6 | 12.7 | 17 000 | 14 000 |
3303 ATN9 | 17 | 47 | 22.2 | 21.6 | 12.7 | 17 000 | 14 000 |
3204 A | 20 | 47 | 20.6 | 20.4 | 12.9 | 16 000 | 14 000 |
3204 A-2RS1 | 20 | 47 | 20.6 | 20.4 | 12.9 | 10 000 | |
3204 A-2RS1TN9/MT33 | 20 | 47 | 20.6 | 20.4 | 12.9 | 10 000 | |
3204 A-2Z | 20 | 47 | 20.6 | 20.4 | 12.9 | 16 000 | 14 000 |
3204 A-2ZTN9/MT33 | 20 | 47 | 20.6 | 20.4 | 12.9 | 16 000 | 14 000 |
3204 ATN9 | 20 | 47 | 20.6 | 20.4 | 12.9 | 16 000 | 14 000 |
3304 A | 20 | 52 | 22.2 | 24.5 | 15.6 | 13 000 | 13 000 |
3304 A-2RS1 | 20 | 52 | 22.2 | 24.5 | 15.6 | 9 000 |
Designation | Principal dimensions | Basic load ratings | Speed ratings | ||||
EASIER/ TKW | dynamic | static | Reference speed | Limiting speed | |||
d[mm] | D[mm] | B[mm] | C[kN] | C0[kN] | [r/min] | [r/min] | |
3304 A-2RS1TN9/MT33 | 20 | 52 | 22.2 | 24.5 | 15.6 | 9 000 | |
3304 A-2Z | 20 | 52 | 22.2 | 24.5 | 15.6 | 13 000 | 13 000 |
3304 A-2ZTN9/MT33 | 20 | 52 | 22.2 | 24.5 | 15.6 | 13 000 | 13 000 |
3304 ATN9 | 20 | 52 | 22.2 | 24.5 | 15.6 | 13 000 | 13 000 |
3205 A | 25 | 52 | 20.6 | 22 | 15.3 | 12 000 | 12 000 |
3205 A-2RS1 | 25 | 52 | 20.6 | 22 | 15.3 | 8 500 | |
3205 A-2RS1TN9/MT33 | 25 | 52 | 20.6 | 22 | 15.3 | 8 500 | |
3205 A-2Z | 25 | 52 | 20.6 | 22 | 15.3 | 12 000 | 12 000 |
3205 A-2ZTN9/MT33 | 25 | 52 | 20.6 | 22 | 15.3 | 12 000 | 12 000 |
3205 ATN9 | 25 | 52 | 20.6 | 22 | 15.3 | 12 000 | 12 000 |
3305 A | 25 | 62 | 25.4 | 32.5 | 22 | 11 000 | 11 000 |
3305 A-2RS1 | 25 | 62 | 25.4 | 32.5 | 22 | 7 500 | |
3305 A-2RS1TN9/MT33 | 25 | 62 | 25.4 | 32.5 | 22 | 7 500 | |
3305 A-2Z | 25 | 62 | 25.4 | 32.5 | 22 | 11 000 | 11 000 |
3305 A-2ZTN9/MT33 | 25 | 62 | 25.4 | 32.5 | 22 | 11 000 | 11 000 |
3305 ATN9 | 25 | 62 | 25.4 | 32.5 | 22 | 11 000 | 11 000 |
3206 A | 30 | 62 | 23.8 | 30.5 | 22 | 10 000 | 10 000 |
3206 A-2RS1 | 30 | 62 | 23.8 | 30.5 | 22 | 7 500 | |
3206 A-2RS1TN9/MT33 | 30 | 62 | 23.8 | 30.5 | 22 | 7 500 | |
3206 A-2Z | 30 | 62 | 23.8 | 30.5 | 22 | 10 000 | 10 000 |
3206 A-2ZTN9/MT33 | 30 | 62 | 23.8 | 30.5 | 22 | 10 000 | 10 000 |
3206 ATN9 | 30 | 62 | 23.8 | 30.5 | 22 | 10 000 | 10 000 |
3306 A | 30 | 72 | 30.2 | 42.5 | 30 | 10 000 | 9 000 |
3306 A-2RS1 | 30 | 72 | 30.2 | 42.5 | 30 | 6 300 | |
3306 A-2RS1TN9/MT33 | 30 | 72 | 30.2 | 42.5 | 30 | 6 300 | |
3306 A-2Z | 30 | 72 | 30.2 | 42.5 | 30 | 10 000 | 9 000 |
3306 A-2ZTN9/MT33 | 30 | 72 | 30.2 | 42.5 | 30 | 10 000 | 9 000 |
3306 ATN9 | 30 | 72 | 30.2 | 42.5 | 30 | 10 000 | 9 000 |
3207 A | 35 | 72 | 27 | 40.5 | 30 | 9 000 | 9 000 |
3207 A-2RS1 | 35 | 72 | 27 | 40.5 | 30 | 6 300 |
Designation | Principal dimensions | Basic load ratings | Speed ratings | ||||
EASIER/ TKW | dynamic | static | Reference speed | Limiting speed | |||
d[mm] | D[mm] | B[mm] | C[kN] | C0[kN] | [r/min] | [r/min] | |
3207 A-2RS1TN9/MT33 | 35 | 72 | 27 | 40.5 | 30 | 6 300 | |
3207 A-2Z | 35 | 72 | 27 | 40.5 | 30 | 9 000 | 9 000 |
3207 A-2ZTN9/MT33 | 35 | 72 | 27 | 40.5 | 30 | 9 000 | 9 000 |
3207 ATN9 | 35 | 72 | 27 | 40.5 | 30 | 9 000 | 9 000 |
3307 A | 35 | 80 | 34.9 | 54 | 38 | 8 500 | 8 500 |
3307 A-2RS1 | 35 | 80 | 34.9 | 54 | 38 | 6 000 | |
3307 A-2RS1TN9/MT33 | 35 | 80 | 34.9 | 54 | 38 | 6 000 | |
3307 A-2Z | 35 | 80 | 34.9 | 54 | 38 | 8 500 | 8 500 |
3307 A-2ZTN9/MT33 | 35 | 80 | 34.9 | 54 | 38 | 8 500 | 8 500 |
3307 ATN9 | 35 | 80 | 34.9 | 54 | 38 | 8 500 | 8 500 |
3307 DJ1 | 35 | 80 | 34.9 | 52.7 | 41.5 | 9 000 | 8 000 |
3208 A | 40 | 80 | 30.2 | 48 | 36.5 | 9 000 | 8 000 |
3208 A-2RS1 | 40 | 80 | 30.2 | 48 | 36.5 | 5 600 | |
3208 A-2RS1TN9/MT33 | 40 | 80 | 30.2 | 48 | 36.5 | 5 600 | |
3208 A-2Z | 40 | 80 | 30.2 | 48 | 36.5 | 9 000 | 8 000 |
3208 A-2ZTN9/MT33 | 40 | 80 | 30.2 | 48 | 36.5 | 9 000 | 8 000 |
3208 ATN9 | 40 | 80 | 30.2 | 48 | 36.5 | 9 000 | 8 000 |
3308 A | 40 | 90 | 36.5 | 65.5 | 48 | 7 500 | 7 500 |
3308 A-2RS1 | 40 | 90 | 36.5 | 65.5 | 48 | 5 000 | |
3308 A-2RS1TN9/MT33 | 40 | 90 | 36.5 | 65.5 | 48 | 5 000 | |
3308 A-2Z | 40 | 90 | 36.5 | 65.5 | 48 | 7 500 | 7 500 |
3308 A-2ZTN9/MT33 | 40 | 90 | 36.5 | 65.5 | 48 | 7 500 | 7 500 |
3308 ATN9 | 40 | 90 | 36.5 | 65.5 | 48 | 7 500 | 7 500 |
3308 DMA | 40 | 90 | 36.5 | 68.9 | 57 | 8 000 | 7 000 |
3308 DNRCBM | 40 | 90 | 36.5 | 49.4 | 41.5 | 8 000 | 7 000 |
3308 DTN9 | 40 | 90 | 36.5 | 68.9 | 57 | 8 000 | 7 000 |
3209 A | 45 | 85 | 30.2 | 52 | 41.5 | 7 500 | 7 500 |
3209 A-2RS1 | 45 | 85 | 30.2 | 52 | 41.5 | 5 300 | |
3209 A-2RS1TN9/MT33 | 45 | 85 | 30.2 | 52 | 41.5 | 5 300 | |
3209 A-2Z | 45 | 85 | 30.2 | 52 | 41.5 | 7 500 | 7 500 |
Designation | Principal dimensions | Basic load ratings | Speed ratings | ||||
EASIER/ TKW | dynamic | static | Reference speed | Limiting speed | |||
d[mm] | D[mm] | B[mm] | C[kN] | C0[kN] | [r/min] | [r/min] | |
3209 A-2ZTN9/MT33 | 45 | 85 | 30.2 | 52 | 41.5 | 7 500 | 7 500 |
3209 ATN9 | 45 | 85 | 30.2 | 52 | 41.5 | 7 500 | 7 500 |
3309 A | 45 | 100 | 39.7 | 75 | 53 | 7 500 | 6 700 |
3309 A-2RS1 | 45 | 100 | 39.7 | 75 | 53 | 4 800 | |
3309 A-2Z | 45 | 100 | 39.7 | 75 | 53 | 7 500 | 6 700 |
3309 ATN9 | 45 | 100 | 39.7 | 75 | 53 | 7 500 | 6 700 |
3309 DMA | 45 | 100 | 39.7 | 79.3 | 69.5 | 7 500 | 6 300 |
3309 DNRCBM | 45 | 100 | 39.7 | 61.8 | 52 | 7 500 | 6 300 |
3210 A | 50 | 90 | 30.2 | 51 | 42.5 | 8 000 | 7 000 |
3210 A-2RS1 | 50 | 90 | 30.2 | 51 | 42.5 | 4 800 | |
3210 A-2RS1TN9/MT33 | 50 | 90 | 30.2 | 51 | 42.5 | 4 800 | |
3210 A-2Z | 50 | 90 | 30.2 | 51 | 42.5 | 8 000 | 7 000 |
3210 A-2ZTN9/MT33 | 50 | 90 | 30.2 | 51 | 42.5 | 8 000 | 7 000 |
3210 ATN9 | 50 | 90 | 30.2 | 51 | 42.5 | 8 000 | 7 000 |
3310 A | 50 | 110 | 44.4 | 95 | 69.5 | 6 000 | 6 000 |
3310 A-2RS1 | 50 | 110 | 44.4 | 95 | 69.5 | 4 300 | |
3310 A-2Z | 50 | 110 | 44.4 | 95 | 69.5 | 6 000 | 6 000 |
3310 ATN9 | 50 | 110 | 44.4 | 95 | 69.5 | 6 000 | 6 000 |
3310 DMA | 50 | 110 | 44.4 | 93.6 | 85 | 6 700 | 5 600 |
3310 DNRCBM | 50 | 110 | 44.4 | 81.9 | 69.5 | 6 700 | 5 600 |
3211 A | 55 | 100 | 33.3 | 61 | 52 | 6 300 | 6 300 |
3211 A-2RS1 | 55 | 100 | 33.3 | 61 | 52 | 4 500 | |
3211 A-2Z | 55 | 100 | 33.3 | 61 | 52 | 6 300 | 6 300 |
3211 ATN9 | 55 | 100 | 33.3 | 61 | 52 | 6 300 | 6 300 |
3311 A | 55 | 120 | 49.2 | 112 | 81.5 | 6 000 | 5 300 |
3311 A-2RS1 | 55 | 120 | 49.2 | 112 | 81.5 | 3 800 | |
3311 A-2Z | 55 | 120 | 49.2 | 112 | 81.5 | 6 000 | 5 300 |
3311 ATN9 | 55 | 120 | 49.2 | 112 | 81.5 | 6 000 | 5 300 |
3311 DMA | 55 | 120 | 49.2 | 111 | 100 | 6 000 | 5 000 |
3311 DNRCBM | 55 | 120 | 49.2 | 95.6 | 83 | 6 000 | 5 300 |
Designation | Principal dimensions | Basic load ratings | Speed ratings | ||||
EASIER/ TKW | dynamic | static | Reference speed | Limiting speed | |||
d[mm] | D[mm] | B[mm] | C[kN] | C0[kN] | [r/min] | [r/min] | |
3212 A | 60 | 110 | 36.5 | 75 | 64 | 5 600 | 5 600 |
3212 A-2RS1 | 60 | 110 | 36.5 | 75 | 64 | 4 000 | |
3212 A-2RS1TN9/MT33 | 60 | 110 | 36.5 | 75 | 64 | 4 000 | |
3212 A-2Z | 60 | 110 | 36.5 | 75 | 64 | 5 600 | 5 600 |
3212 ATN9 | 60 | 110 | 36.5 | 75 | 64 | 5 600 | 5 600 |
3312 A | 60 | 130 | 54 | 127 | 95 | 5 600 | 5 000 |
3312 A-2Z | 60 | 130 | 54 | 127 | 95 | 5 600 | 5 000 |
3213 A | 65 | 120 | 38.1 | 80.6 | 73.5 | 5 600 | 4 800 |
3213 A-2RS1 | 65 | 120 | 38.1 | 80.6 | 73.5 | 3 600 | |
3213 A-2Z | 65 | 120 | 38.1 | 80.6 | 73.5 | 5 600 | 4 800 |
3313 A | 65 | 140 | 58.7 | 146 | 110 | 5 300 | 4 500 |
3313 A-2Z | 65 | 140 | 58.7 | 146 | 110 | 5 300 | 4 500 |
3313 DNRCBM | 65 | 140 | 58.7 | 138 | 122 | 5 300 | 4 500 |
3214 A | 70 | 125 | 39.7 | 88.4 | 80 | 5 600 | 4 500 |
3214 A-2Z | 70 | 125 | 39.7 | 88.4 | 80 | 5 600 | 4 500 |
3314 A | 70 | 150 | 63.5 | 163 | 125 | 5 000 | 4 300 |
3314 A-2Z | 70 | 150 | 63.5 | 163 | 125 | 5 000 | 4 300 |
3215 A | 75 | 130 | 41.3 | 95.6 | 88 | 5 300 | 4 500 |
3215 A-2Z | 75 | 130 | 41.3 | 95.6 | 88 | 5 300 | 4 500 |
3315 A | 75 | 160 | 68.3 | 176 | 140 | 4 500 | 4 000 |
3315 A-2Z | 75 | 160 | 68.3 | 176 | 140 | 4 500 | 4 000 |
3216 A | 80 | 140 | 44.4 | 106 | 95 | 5 000 | 4 300 |
3316 A | 80 | 170 | 68.3 | 193 | 156 | 4 300 | 3 800 |
3217 A | 85 | 150 | 49.2 | 124 | 110 | 4 500 | 3 800 |
3317 A | 85 | 180 | 73 | 208 | 176 | 4 000 | 3 600 |
3218 A | 90 | 160 | 52.4 | 130 | 120 | 4 300 | 3 600 |
3318 A | 90 | 190 | 73 | 208 | 180 | 3 800 | 3 400 |
3219 A | 95 | 170 | 55.6 | 159 | 146 | 4 000 | 3 400 |
3319 A | 95 | 200 | 77.8 | 240 | 216 | 3 600 | 3 200 |
3220 A | 100 | 180 | 60.3 | 178 | 166 | 3 800 | 3 200 |
Designation | Principal dimensions | Basic load ratings | Speed ratings | ||||
EASIER/ TKW | dynamic | static | Reference speed | Limiting speed | |||
d[mm] | D[mm] | B[mm] | C[kN] | C0[kN] | [r/min] | [r/min] | |
3320 A | 100 | 215 | 82.6 | 255 | 255 | 3 400 | 2 800 |
3222 A | 110 | 200 | 69.8 | 212 | 212 | 3 400 | 2 800 |
3322 A | 110 | 240 | 92.1 | 291 | 305 | 3 000 | 2 600 |
305256 D | 120 | 190 | 66 | 182 | 232 | 3 400 | 3 600 |
305283 D | 150 | 230 | 70 | 203 | 285 | 2 800 | 3 000 |
305283 DA | 150 | 230 | 70 | 203 | 285 | 2 800 | 3 000 |
305286 D | 150 | 225 | 73 | 182 | 265 | 1 700 | 2 000 |
305608 | 160 | 215 | 56 | 135 | 220 | 2 800 | 3 000 |
305608 B | 160 | 215 | 56 | 135 | 220 | 2 800 | 3 000 |
305262 D | 180 | 259.5 | 66 | 225 | 310 | 2 400 | 2 600 |
305288 DA | 180 | 250 | 70 | 190 | 285 | 2 400 | 2 600 |
305338 D | 190 | 269.5 | 66 | 270 | 415 | 2 200 | 2 400 |
305263 D | 200 | 289.5 | 76 | 302 | 475 | 1 800 | 2 200 |
305263 DA | 200 | 289.5 | 76 | 302 | 475 | 1 800 | 2 200 |
305428 D | 200 | 279.5 | 76 | 242 | 380 | 1 900 | 2 400 |
305272 D | 220 | 309.5 | 76 | 312 | 520 | 2 000 | 2 000 |
305272 DA | 220 | 309.5 | 76 | 312 | 520 | 2 000 | 2 000 |
305272 DB | 220 | 309.5 | 76 | 312 | 520 | 2 000 | 2 000 |
305264 D | 230 | 329.5 | 80 | 351 | 600 | 1 900 | 2 000 |
305270 D | 260 | 369.5 | 92 | 397 | 710 | 1 700 | 1 700 |
305269 D | 280 | 389.5 | 92 | 403 | 750 | 1 600 | 1 600 |
EASIER / TKW also can produce the more design of Double Row Angular Contact Ball Bearings
-- Double Row Deep Groove Ball Bearings
-- LR5 Double Row Angular Contact Ball Bearings
-- LFR Double Row Angular Contact Ball Bearings
-- 3800 Double Row Angular Contact Ball Bearings
-- 3900 Double Row Angular Contact Ball Bearings
-- Single Row Angular Contact Ball Bearings
-- Super Precision Bearings for High Speed Turbochargers
Double Row Angular Contact Ball Bearings
Designation | Principal dimensions | Basic load ratings | Speed ratings | ||||
EASIER/ TKW | dynamic | static | Reference speed | Limiting speed | |||
d[mm] | D[mm] | B[mm] | C[kN] | C0[kN] | [r/min] | [r/min] | |
3200 A-2RS1TN9/MT33 | 10 | 30 | 14 | 7.61 | 4.3 | 17 000 | |
3200 A-2ZTN9/MT33 | 10 | 30 | 14 | 7.61 | 4.3 | 26 000 | 24 000 |
3200 ATN9 | 10 | 30 | 14 | 7.61 | 4.3 | 26 000 | 24 000 |
3201 A-2RS1TN9/MT33 | 12 | 32 | 15.9 | 10.1 | 5.6 | 15 000 | |
3201 A-2ZTN9/MT33 | 12 | 32 | 15.9 | 10.1 | 5.6 | 24 000 | 22 000 |
3201 ATN9 | 12 | 32 | 15.9 | 10.1 | 5.6 | 24 000 | 22 000 |
3202 A-2RS1TN9/MT33 | 15 | 35 | 15.9 | 11.2 | 6.8 | 14 000 | |
3202 A-2ZTN9/MT33 | 15 | 35 | 15.9 | 11.2 | 6.8 | 22 000 | 18 000 |
3202 ATN9 | 15 | 35 | 15.9 | 11.2 | 6.8 | 22 000 | 18 000 |
3302 A-2RS1 | 15 | 42 | 19 | 15.1 | 9.3 | 12 000 | |
3302 A-2RS1TN9/MT33 | 15 | 42 | 19 | 15.1 | 9.3 | 12 000 | |
3302 A-2Z | 15 | 42 | 19 | 15.1 | 9.3 | 18 000 | 16 000 |
3302 A-2ZTN9/MT33 | 15 | 42 | 19 | 15.1 | 9.3 | 18 000 | 16 000 |
3302 ATN9 | 15 | 42 | 19 | 15.1 | 9.3 | 18 000 | 16 000 |
3203 A-2RS1TN9/MT33 | 17 | 40 | 17.5 | 14.3 | 8.8 | 12 000 | |
3203 A-2ZTN9/MT33 | 17 | 40 | 17.5 | 14.3 | 8.8 | 19 000 | 16 000 |
3203 ATN9 | 17 | 40 | 17.5 | 14.3 | 8.8 | 19 000 | 16 000 |
3303 A-2RS1 | 17 | 47 | 22.2 | 21.6 | 12.7 | 11 000 | |
3303 A-2RS1TN9/MT33 | 17 | 47 | 22.2 | 21.6 | 12.7 | 11 000 | |
3303 A-2Z | 17 | 47 | 22.2 | 21.6 | 12.7 | 17 000 | 14 000 |
3303 A-2ZTN9/MT33 | 17 | 47 | 22.2 | 21.6 | 12.7 | 17 000 | 14 000 |
3303 ATN9 | 17 | 47 | 22.2 | 21.6 | 12.7 | 17 000 | 14 000 |
3204 A | 20 | 47 | 20.6 | 20.4 | 12.9 | 16 000 | 14 000 |
3204 A-2RS1 | 20 | 47 | 20.6 | 20.4 | 12.9 | 10 000 | |
3204 A-2RS1TN9/MT33 | 20 | 47 | 20.6 | 20.4 | 12.9 | 10 000 | |
3204 A-2Z | 20 | 47 | 20.6 | 20.4 | 12.9 | 16 000 | 14 000 |
3204 A-2ZTN9/MT33 | 20 | 47 | 20.6 | 20.4 | 12.9 | 16 000 | 14 000 |
3204 ATN9 | 20 | 47 | 20.6 | 20.4 | 12.9 | 16 000 | 14 000 |
3304 A | 20 | 52 | 22.2 | 24.5 | 15.6 | 13 000 | 13 000 |
3304 A-2RS1 | 20 | 52 | 22.2 | 24.5 | 15.6 | 9 000 |
Designation | Principal dimensions | Basic load ratings | Speed ratings | ||||
EASIER/ TKW | dynamic | static | Reference speed | Limiting speed | |||
d[mm] | D[mm] | B[mm] | C[kN] | C0[kN] | [r/min] | [r/min] | |
3304 A-2RS1TN9/MT33 | 20 | 52 | 22.2 | 24.5 | 15.6 | 9 000 | |
3304 A-2Z | 20 | 52 | 22.2 | 24.5 | 15.6 | 13 000 | 13 000 |
3304 A-2ZTN9/MT33 | 20 | 52 | 22.2 | 24.5 | 15.6 | 13 000 | 13 000 |
3304 ATN9 | 20 | 52 | 22.2 | 24.5 | 15.6 | 13 000 | 13 000 |
3205 A | 25 | 52 | 20.6 | 22 | 15.3 | 12 000 | 12 000 |
3205 A-2RS1 | 25 | 52 | 20.6 | 22 | 15.3 | 8 500 | |
3205 A-2RS1TN9/MT33 | 25 | 52 | 20.6 | 22 | 15.3 | 8 500 | |
3205 A-2Z | 25 | 52 | 20.6 | 22 | 15.3 | 12 000 | 12 000 |
3205 A-2ZTN9/MT33 | 25 | 52 | 20.6 | 22 | 15.3 | 12 000 | 12 000 |
3205 ATN9 | 25 | 52 | 20.6 | 22 | 15.3 | 12 000 | 12 000 |
3305 A | 25 | 62 | 25.4 | 32.5 | 22 | 11 000 | 11 000 |
3305 A-2RS1 | 25 | 62 | 25.4 | 32.5 | 22 | 7 500 | |
3305 A-2RS1TN9/MT33 | 25 | 62 | 25.4 | 32.5 | 22 | 7 500 | |
3305 A-2Z | 25 | 62 | 25.4 | 32.5 | 22 | 11 000 | 11 000 |
3305 A-2ZTN9/MT33 | 25 | 62 | 25.4 | 32.5 | 22 | 11 000 | 11 000 |
3305 ATN9 | 25 | 62 | 25.4 | 32.5 | 22 | 11 000 | 11 000 |
3206 A | 30 | 62 | 23.8 | 30.5 | 22 | 10 000 | 10 000 |
3206 A-2RS1 | 30 | 62 | 23.8 | 30.5 | 22 | 7 500 | |
3206 A-2RS1TN9/MT33 | 30 | 62 | 23.8 | 30.5 | 22 | 7 500 | |
3206 A-2Z | 30 | 62 | 23.8 | 30.5 | 22 | 10 000 | 10 000 |
3206 A-2ZTN9/MT33 | 30 | 62 | 23.8 | 30.5 | 22 | 10 000 | 10 000 |
3206 ATN9 | 30 | 62 | 23.8 | 30.5 | 22 | 10 000 | 10 000 |
3306 A | 30 | 72 | 30.2 | 42.5 | 30 | 10 000 | 9 000 |
3306 A-2RS1 | 30 | 72 | 30.2 | 42.5 | 30 | 6 300 | |
3306 A-2RS1TN9/MT33 | 30 | 72 | 30.2 | 42.5 | 30 | 6 300 | |
3306 A-2Z | 30 | 72 | 30.2 | 42.5 | 30 | 10 000 | 9 000 |
3306 A-2ZTN9/MT33 | 30 | 72 | 30.2 | 42.5 | 30 | 10 000 | 9 000 |
3306 ATN9 | 30 | 72 | 30.2 | 42.5 | 30 | 10 000 | 9 000 |
3207 A | 35 | 72 | 27 | 40.5 | 30 | 9 000 | 9 000 |
3207 A-2RS1 | 35 | 72 | 27 | 40.5 | 30 | 6 300 |
Designation | Principal dimensions | Basic load ratings | Speed ratings | ||||
EASIER/ TKW | dynamic | static | Reference speed | Limiting speed | |||
d[mm] | D[mm] | B[mm] | C[kN] | C0[kN] | [r/min] | [r/min] | |
3207 A-2RS1TN9/MT33 | 35 | 72 | 27 | 40.5 | 30 | 6 300 | |
3207 A-2Z | 35 | 72 | 27 | 40.5 | 30 | 9 000 | 9 000 |
3207 A-2ZTN9/MT33 | 35 | 72 | 27 | 40.5 | 30 | 9 000 | 9 000 |
3207 ATN9 | 35 | 72 | 27 | 40.5 | 30 | 9 000 | 9 000 |
3307 A | 35 | 80 | 34.9 | 54 | 38 | 8 500 | 8 500 |
3307 A-2RS1 | 35 | 80 | 34.9 | 54 | 38 | 6 000 | |
3307 A-2RS1TN9/MT33 | 35 | 80 | 34.9 | 54 | 38 | 6 000 | |
3307 A-2Z | 35 | 80 | 34.9 | 54 | 38 | 8 500 | 8 500 |
3307 A-2ZTN9/MT33 | 35 | 80 | 34.9 | 54 | 38 | 8 500 | 8 500 |
3307 ATN9 | 35 | 80 | 34.9 | 54 | 38 | 8 500 | 8 500 |
3307 DJ1 | 35 | 80 | 34.9 | 52.7 | 41.5 | 9 000 | 8 000 |
3208 A | 40 | 80 | 30.2 | 48 | 36.5 | 9 000 | 8 000 |
3208 A-2RS1 | 40 | 80 | 30.2 | 48 | 36.5 | 5 600 | |
3208 A-2RS1TN9/MT33 | 40 | 80 | 30.2 | 48 | 36.5 | 5 600 | |
3208 A-2Z | 40 | 80 | 30.2 | 48 | 36.5 | 9 000 | 8 000 |
3208 A-2ZTN9/MT33 | 40 | 80 | 30.2 | 48 | 36.5 | 9 000 | 8 000 |
3208 ATN9 | 40 | 80 | 30.2 | 48 | 36.5 | 9 000 | 8 000 |
3308 A | 40 | 90 | 36.5 | 65.5 | 48 | 7 500 | 7 500 |
3308 A-2RS1 | 40 | 90 | 36.5 | 65.5 | 48 | 5 000 | |
3308 A-2RS1TN9/MT33 | 40 | 90 | 36.5 | 65.5 | 48 | 5 000 | |
3308 A-2Z | 40 | 90 | 36.5 | 65.5 | 48 | 7 500 | 7 500 |
3308 A-2ZTN9/MT33 | 40 | 90 | 36.5 | 65.5 | 48 | 7 500 | 7 500 |
3308 ATN9 | 40 | 90 | 36.5 | 65.5 | 48 | 7 500 | 7 500 |
3308 DMA | 40 | 90 | 36.5 | 68.9 | 57 | 8 000 | 7 000 |
3308 DNRCBM | 40 | 90 | 36.5 | 49.4 | 41.5 | 8 000 | 7 000 |
3308 DTN9 | 40 | 90 | 36.5 | 68.9 | 57 | 8 000 | 7 000 |
3209 A | 45 | 85 | 30.2 | 52 | 41.5 | 7 500 | 7 500 |
3209 A-2RS1 | 45 | 85 | 30.2 | 52 | 41.5 | 5 300 | |
3209 A-2RS1TN9/MT33 | 45 | 85 | 30.2 | 52 | 41.5 | 5 300 | |
3209 A-2Z | 45 | 85 | 30.2 | 52 | 41.5 | 7 500 | 7 500 |
Designation | Principal dimensions | Basic load ratings | Speed ratings | ||||
EASIER/ TKW | dynamic | static | Reference speed | Limiting speed | |||
d[mm] | D[mm] | B[mm] | C[kN] | C0[kN] | [r/min] | [r/min] | |
3209 A-2ZTN9/MT33 | 45 | 85 | 30.2 | 52 | 41.5 | 7 500 | 7 500 |
3209 ATN9 | 45 | 85 | 30.2 | 52 | 41.5 | 7 500 | 7 500 |
3309 A | 45 | 100 | 39.7 | 75 | 53 | 7 500 | 6 700 |
3309 A-2RS1 | 45 | 100 | 39.7 | 75 | 53 | 4 800 | |
3309 A-2Z | 45 | 100 | 39.7 | 75 | 53 | 7 500 | 6 700 |
3309 ATN9 | 45 | 100 | 39.7 | 75 | 53 | 7 500 | 6 700 |
3309 DMA | 45 | 100 | 39.7 | 79.3 | 69.5 | 7 500 | 6 300 |
3309 DNRCBM | 45 | 100 | 39.7 | 61.8 | 52 | 7 500 | 6 300 |
3210 A | 50 | 90 | 30.2 | 51 | 42.5 | 8 000 | 7 000 |
3210 A-2RS1 | 50 | 90 | 30.2 | 51 | 42.5 | 4 800 | |
3210 A-2RS1TN9/MT33 | 50 | 90 | 30.2 | 51 | 42.5 | 4 800 | |
3210 A-2Z | 50 | 90 | 30.2 | 51 | 42.5 | 8 000 | 7 000 |
3210 A-2ZTN9/MT33 | 50 | 90 | 30.2 | 51 | 42.5 | 8 000 | 7 000 |
3210 ATN9 | 50 | 90 | 30.2 | 51 | 42.5 | 8 000 | 7 000 |
3310 A | 50 | 110 | 44.4 | 95 | 69.5 | 6 000 | 6 000 |
3310 A-2RS1 | 50 | 110 | 44.4 | 95 | 69.5 | 4 300 | |
3310 A-2Z | 50 | 110 | 44.4 | 95 | 69.5 | 6 000 | 6 000 |
3310 ATN9 | 50 | 110 | 44.4 | 95 | 69.5 | 6 000 | 6 000 |
3310 DMA | 50 | 110 | 44.4 | 93.6 | 85 | 6 700 | 5 600 |
3310 DNRCBM | 50 | 110 | 44.4 | 81.9 | 69.5 | 6 700 | 5 600 |
3211 A | 55 | 100 | 33.3 | 61 | 52 | 6 300 | 6 300 |
3211 A-2RS1 | 55 | 100 | 33.3 | 61 | 52 | 4 500 | |
3211 A-2Z | 55 | 100 | 33.3 | 61 | 52 | 6 300 | 6 300 |
3211 ATN9 | 55 | 100 | 33.3 | 61 | 52 | 6 300 | 6 300 |
3311 A | 55 | 120 | 49.2 | 112 | 81.5 | 6 000 | 5 300 |
3311 A-2RS1 | 55 | 120 | 49.2 | 112 | 81.5 | 3 800 | |
3311 A-2Z | 55 | 120 | 49.2 | 112 | 81.5 | 6 000 | 5 300 |
3311 ATN9 | 55 | 120 | 49.2 | 112 | 81.5 | 6 000 | 5 300 |
3311 DMA | 55 | 120 | 49.2 | 111 | 100 | 6 000 | 5 000 |
3311 DNRCBM | 55 | 120 | 49.2 | 95.6 | 83 | 6 000 | 5 300 |
Designation | Principal dimensions | Basic load ratings | Speed ratings | ||||
EASIER/ TKW | dynamic | static | Reference speed | Limiting speed | |||
d[mm] | D[mm] | B[mm] | C[kN] | C0[kN] | [r/min] | [r/min] | |
3212 A | 60 | 110 | 36.5 | 75 | 64 | 5 600 | 5 600 |
3212 A-2RS1 | 60 | 110 | 36.5 | 75 | 64 | 4 000 | |
3212 A-2RS1TN9/MT33 | 60 | 110 | 36.5 | 75 | 64 | 4 000 | |
3212 A-2Z | 60 | 110 | 36.5 | 75 | 64 | 5 600 | 5 600 |
3212 ATN9 | 60 | 110 | 36.5 | 75 | 64 | 5 600 | 5 600 |
3312 A | 60 | 130 | 54 | 127 | 95 | 5 600 | 5 000 |
3312 A-2Z | 60 | 130 | 54 | 127 | 95 | 5 600 | 5 000 |
3213 A | 65 | 120 | 38.1 | 80.6 | 73.5 | 5 600 | 4 800 |
3213 A-2RS1 | 65 | 120 | 38.1 | 80.6 | 73.5 | 3 600 | |
3213 A-2Z | 65 | 120 | 38.1 | 80.6 | 73.5 | 5 600 | 4 800 |
3313 A | 65 | 140 | 58.7 | 146 | 110 | 5 300 | 4 500 |
3313 A-2Z | 65 | 140 | 58.7 | 146 | 110 | 5 300 | 4 500 |
3313 DNRCBM | 65 | 140 | 58.7 | 138 | 122 | 5 300 | 4 500 |
3214 A | 70 | 125 | 39.7 | 88.4 | 80 | 5 600 | 4 500 |
3214 A-2Z | 70 | 125 | 39.7 | 88.4 | 80 | 5 600 | 4 500 |
3314 A | 70 | 150 | 63.5 | 163 | 125 | 5 000 | 4 300 |
3314 A-2Z | 70 | 150 | 63.5 | 163 | 125 | 5 000 | 4 300 |
3215 A | 75 | 130 | 41.3 | 95.6 | 88 | 5 300 | 4 500 |
3215 A-2Z | 75 | 130 | 41.3 | 95.6 | 88 | 5 300 | 4 500 |
3315 A | 75 | 160 | 68.3 | 176 | 140 | 4 500 | 4 000 |
3315 A-2Z | 75 | 160 | 68.3 | 176 | 140 | 4 500 | 4 000 |
3216 A | 80 | 140 | 44.4 | 106 | 95 | 5 000 | 4 300 |
3316 A | 80 | 170 | 68.3 | 193 | 156 | 4 300 | 3 800 |
3217 A | 85 | 150 | 49.2 | 124 | 110 | 4 500 | 3 800 |
3317 A | 85 | 180 | 73 | 208 | 176 | 4 000 | 3 600 |
3218 A | 90 | 160 | 52.4 | 130 | 120 | 4 300 | 3 600 |
3318 A | 90 | 190 | 73 | 208 | 180 | 3 800 | 3 400 |
3219 A | 95 | 170 | 55.6 | 159 | 146 | 4 000 | 3 400 |
3319 A | 95 | 200 | 77.8 | 240 | 216 | 3 600 | 3 200 |
3220 A | 100 | 180 | 60.3 | 178 | 166 | 3 800 | 3 200 |
Designation | Principal dimensions | Basic load ratings | Speed ratings | ||||
EASIER/ TKW | dynamic | static | Reference speed | Limiting speed | |||
d[mm] | D[mm] | B[mm] | C[kN] | C0[kN] | [r/min] | [r/min] | |
3320 A | 100 | 215 | 82.6 | 255 | 255 | 3 400 | 2 800 |
3222 A | 110 | 200 | 69.8 | 212 | 212 | 3 400 | 2 800 |
3322 A | 110 | 240 | 92.1 | 291 | 305 | 3 000 | 2 600 |
305256 D | 120 | 190 | 66 | 182 | 232 | 3 400 | 3 600 |
305283 D | 150 | 230 | 70 | 203 | 285 | 2 800 | 3 000 |
305283 DA | 150 | 230 | 70 | 203 | 285 | 2 800 | 3 000 |
305286 D | 150 | 225 | 73 | 182 | 265 | 1 700 | 2 000 |
305608 | 160 | 215 | 56 | 135 | 220 | 2 800 | 3 000 |
305608 B | 160 | 215 | 56 | 135 | 220 | 2 800 | 3 000 |
305262 D | 180 | 259.5 | 66 | 225 | 310 | 2 400 | 2 600 |
305288 DA | 180 | 250 | 70 | 190 | 285 | 2 400 | 2 600 |
305338 D | 190 | 269.5 | 66 | 270 | 415 | 2 200 | 2 400 |
305263 D | 200 | 289.5 | 76 | 302 | 475 | 1 800 | 2 200 |
305263 DA | 200 | 289.5 | 76 | 302 | 475 | 1 800 | 2 200 |
305428 D | 200 | 279.5 | 76 | 242 | 380 | 1 900 | 2 400 |
305272 D | 220 | 309.5 | 76 | 312 | 520 | 2 000 | 2 000 |
305272 DA | 220 | 309.5 | 76 | 312 | 520 | 2 000 | 2 000 |
305272 DB | 220 | 309.5 | 76 | 312 | 520 | 2 000 | 2 000 |
305264 D | 230 | 329.5 | 80 | 351 | 600 | 1 900 | 2 000 |
305270 D | 260 | 369.5 | 92 | 397 | 710 | 1 700 | 1 700 |
305269 D | 280 | 389.5 | 92 | 403 | 750 | 1 600 | 1 600 |
EASIER / TKW also can produce the more design of Double Row Angular Contact Ball Bearings
-- Double Row Deep Groove Ball Bearings
-- LR5 Double Row Angular Contact Ball Bearings
-- LFR Double Row Angular Contact Ball Bearings
-- 3800 Double Row Angular Contact Ball Bearings
-- 3900 Double Row Angular Contact Ball Bearings
-- Single Row Angular Contact Ball Bearings
-- Super Precision Bearings for High Speed Turbochargers